0
They make a special tool for this, usually found in the section with the 'HELP' brand items, found in most auto parts stores. The clip that must be removed is shaped a little like a horseshoe. I personally have always used a small Allen wrench to remove the clip, but would not recomend this to someone who is not already very familiar with it. Good Luck
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove the window crank in a 1979 corvette?
They sell a window crank removal tool to open the cotter in and slide off the winow crank handle. Slide the tool under the window handle and push the cotter pin back, off comes the handle
How do you tighten a door mirror on a 1979 Corvette?
remove the window to get access to the nuts remove them then the mirrors look in the pillars an tighten them up.
How do you remove an ignition switch from a 1979 Chevrolet C10 pickup?
Remove the retaining ring from the top of your 1979 Chevrolet C 10 pickup truck ignition switch. Slide the ignition switch out and remove the wiring harness.
How do you remove the heater core from a 1979 Chevrolet C10 pickup?
It is mounted under the drivers side of the truck in the frame rail.
How do you remove the rear brake drum on a 1979 Chevy 34 ton truck?
Remove bolts at center hub Slide axle out Remove spanner nut drums should slide off
How do you CONVERT MANUAL WINDOWS TO POWER WINDOWS IN 1979 CHEVY PICKUP?
check with www.lmctruck.com for a conversion kit. otherwise,find a truck that has them and remove everything including wires and switches and transfer it to your truck
How do you remove brake drum on a 1979 Ford 34 ton truck?
you must pull the axles, remove the bearings and then the hub/brake drum assmbly. comes off as one unit.
1979 camaro electric window?
what about it?
What is the max RPM and hp for a 1979 Chevy 366 truck engine?
It should be able to handle 5500 rpm without damage, but probably doesn't make much torque over 4500.
How do you replace the flywheel on a 1979 Chevrolet 350 truck?
It's between the engine and transmission. The only way to disconnect it from the crankshaft is to remove either the engine or transmission... or both.
What tv show had the catch phase handle it handle it?
"Carter Country" (1977-1979).
How hard is it to get the king pins out on a 1979 mack truck?
The king pin is part of the trailer, not the truck...
