no special order, torque is 70 ft. lbs.
Chat with our AI personalities
Tighten Caliper bolts to 25 Ft. Lbs.
Undo all the bolts, disconnect the drive shaft, and let it drop.
Sheet metal cover 12 to 18 ftlbs
3/8-16x1 1/4 grade 8
All chev starters with 2 vertical bolts (4,6 or 8 cyl) will fit
Need the model year and engine size.
CHEV
I have a 99 Chev Malibu - there were 3 bolts (which is why I had a hell of a time getting it off. Persistance! I think 1 was at the back and another towards the bottom at the back.
its called an inverted torx, but I dont remember the size
Easiest way is to go to a Chev dealer parts department - they have the entire line of Chev vehicles reduced to blow-up schematics and can give you the part number of ANY vehicle Chev makes. Even if you don't order the part thru them they will probably do you a favor for "customer satisfaction."
Chev.
Starting on a diagonal pair of carb bolts, tighten the pair to 3 ft lbs, then the opposite diagonal pair to 3 ft lbs and finally all 4 bolts to 12 ft lbs.