Counter clockwise to loosen.
It turns counter clockwise to loosen.
To loosen a bolt on a 1998 Jeep Cherokee Classic, you should turn it counterclockwise (to the left). This follows the standard righty-tighty, lefty-loosey rule for bolts and screws. Make sure to apply steady pressure and, if needed, use penetrating oil on rusted bolts for easier loosening.
99 jeep Cherokee Laredo stay running after turn off the ignition switch?
turn the key
To turn the engine over.
Clockwise.
pull the turn signal lever toward you.
what number is the fuse on a 2002 garnd cherokee and where is it located
This will happen if the 4 wheel drive is engaged.
To replace a turn signal on a 1994 Jeep Grand Cherokee prop the hood open. Locate the headlight housing and the turn signal will be located next to it. Find the bulb and remove it from the housing. Replace the bulb.
If you have factory installed fog lights (driving lights) you have to pull out the knob on the light stem towards the direction of the drivers side mirror
You will have to drill the center out to get it to turn.