0
Add your answer:
Earn +20 pts
How do you replace outside window weather strip 1991 Chevy s10?
1991 Chevy s10 how to replace outside window weather strip
How do you replace the driver side door of a Chevy S10 blazer?
You didn't say what year you have but, later models require removing the door panel, disconnecting the wire harness, removing the detent spring and drive out the two hinge pins. The spring will need a special tool to replace. You don't want to replace the hinges unless you have no choice. The original hinges are welded in to the door and the cab. They can be replaced but it is a expensive job. In most cases you can replace the hinge pins and bushings to restore the hinges back to normal. The pins and bushings are available at your local auto parts store.
How do you take the door panel off of a 1991 Chevrolet S10 Blazer?
I've got a 91 s10 truck and I'm trying to get the panes replaced...I've tried to take them off according to the manual but, the plastic pins holding them to the metal are so old that they are breaking.
How do you replace a passenger side power mirror assembly on a 1995 S10 blazer. If you have to remove the door panel how do you do that?
how to remove the door panel of a 1995 s10
How do you replace driver side door blazer s10?
Remove the inside door panel. Disconnect wire harness from inside of door and slide the harness out of the door. Remove door detent spring with proper tool (can be purchased from your local auto parts store for aprox $10). Support bottom of door with a jack or any suitable device.Remove retaining clips from door hinge pins. Have a friend hold the door upright while you drive out the hinge pins with a long punch and hammer. Once the pins are out the door can be removed. Reverse procedure to install. I would suggest replacing the pins and bushings with new ones. Once again these pins and bushings are available from your local auto parts store for cheap.
How much does a 1991 S10 blazer 4 door 4X4 weight?
4000 pounds
How do you replace the driver side door of a1992 Chevy S10 blazer?
Remove the inside door panel. Disconnect wire harness from inside of door and slide the harness out of the door. Remove door detent spring with proper tool (can be purchased from your local auto parts store for aprox $10). Support bottom of door with a jack or any suitable device.Remove retaining clips from door hinge pins. Have a friend hold the door upright while you drive out the hinge pins with a long punch and hammer. Once the pins are out the door can be removed. Reverse procedure to install. I would suggest replacing the pins and bushings with new ones. Once again these pins and bushings are available from your local auto parts store for cheap.
How do you remove door locks on 91 s10 not the handle the small round part u stick the key in?
To remove the door locks on a 1991 S10, the door panel has to be removed. There are bolts inside that hold the lock mechanism in place.
Install front door speakers on 2003 Chevy s10?
need to replace door speaker on 2003 Chevrolet Tahoe
How do you change the pins on a 200 Chevy s-10 blazer on the drivers door?
just did my driver side door on my 2000 s10. check out this link. all the info needed. http://www.s10forum.com/door_pin_and_bushing_repair
How do you replace 91 S10 door with 88 S10 door?
Replacing a door from a 91 S10 with one from an 88 S10 may require modifications due to potential differences in design and dimensions between the two models. You may need to address issues related to wiring, fittings, and alignment. It is recommended to consult a professional mechanic or body shop to ensure a proper and safe installation.
How to replace side mirror on 1997 S10 blazer?
on mine i had to take the door panel off to get to the bolts, after that its easy
