0
What else can I help you with?
How do you set the clock on a 1992 Pontiac Sunbird?
Turn the ignion on, turn radio off. Press the "Set" button. Use the "seek" and "scan" buttons to set the time.
How do you set clock for 2003 Pontiac grand am?
a picture of the radio would be helpful
How do you set the timing on a 1992 Pontiac Sunbird V4?
You don't- it's controlled by the PCM. If is has a 2.5 engine you cann't adjust the timing
How do set clock in 1989 Sunbird Le?
With the radio turned off, push the set button. The scan button changes the hours and the seek button changes the minutes.
How do i Set clock 1993 Oldsmobile eighty eight?
Let Patrick do it!
How do you Set the clock on a 1993 Dodge Intrepid?
The clock on the radio can be set by two buttons found to the right on the display screen. H for hour and M for minute.
How do you set the clock on a 1993 Plymouth sundance?
To set the clock on a 1993 Plymouth Sundance, first, ensure the ignition is in the "Run" position. Locate the clock setting buttons on the dashboard; typically, there are two buttons labeled "HR" (hour) and "MIN" (minute). Press the "HR" button to set the hour and the "MIN" button to set the minutes until the correct time is displayed. Once set, the clock will retain the time even when the ignition is off.
How do you set the timimg on a 1993 Pontiac Grand Am 6-cylinder?
Computer controlled and not adjustable
How do you set the clock in a '94 sunbird?
Turn the radio OFF. You will need to hit the SET button one time. Then use your long buttons on top, (SEEK, SCAN) for your hour and minutes. Good luck!
How do you set the clock on a 2004 Pontiac Grand Am?
Push the set button and within 10 seconds push the seek and scan buttons to change time.
How do you set clock on a 1993 Chrysler Lebaron?
Turn the radio on and press sel twice for hours and once for mins
How do you set the timing on a 1991 Pontiac Sunbird LE?
To set the timing on a 1991 Pontiac Sunbird LE, first, ensure the engine is at operating temperature and then turn off the engine. Connect a timing light to the number one spark plug wire and the battery, then start the engine. Locate the timing marks on the crankshaft pulley and the timing cover, and adjust the distributor as necessary to align the marks to the specified timing degree, usually around 10 degrees BTDC for this model. Finally, tighten the distributor clamp and recheck the timing to ensure it is set correctly.
