0
How do you get the bolt back in on a Remington Sportmaster .22 after removing it?
Wiki User
∙ 15y ago
Pull the trigger all the way back and then slide the bolt right in. You probably already know to check to make sure it is unloaded but you can never be to sorry.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you get the bolt back in a Remington 592M?
how do you get the bolt back in a remengton 592
How remove bolt 510 Remington?
Hey, you can try pulling back on the trigger while removing the bolt to the rear. Do the same to reinstall the bolt back in the barrel assy. I have a 514 and that's how it is done. Hope this helps . . . John <john.gro@gmail.com>
How do you remove the bolt from the breech of a Remington 270 rifle?
There is a button at the beginning of the breach that you pusy in and the bolt will pull straight back out of the breach.
How do you remove the bolt on a Remington 700?
depress the small square button in front of the trigger when bolt is pulled all th way back
Install the bolt Remington model 512?
Please tell me how to install the bolt in a Remington Model 512
How do you remove bolt from Remington model 600?
If you look at the very back of the receiver on the left side there will be a small tip of the bolt stop showing in the left bolt guide channel, push it down while the bolt is open and pull back on the bolt. Should fall out .
What is the value of a Remington model 341?
$350-475. depending on condition. Great gun, but plain looking.
How do you remove the bolt from a Remington model 721 rifle?
Actuate the bolt to the rear and there is a tang in front of the trigger that hangs down..Press up on this tang and pull the bolt back and it will remove it from the action.
How do you remove the bolt from a Remington 512-X?
Lift the bolt, pull it back, and then depress the trigger (just don't make it too "sad" ! ) while pulling it out of the rifle.
What is the vaue of a Remington 700 bolt action 270 EP rifle?
What is the value of a Remington 700 bolt action 270ml rifle?
Do they make a Remington lever action rifle?
No, bolt-action only. Bummer! I was under the impression that they did some years back but discontinued the 35 cal. lever action rifle by Remington
How do you remove bolt from Remington model 581?
the safety switch, just behind the breach, next to the bolt, doubles as the bolt-release. with the gun unloaded, pull the bolt back and push the safety switch forward past the "fire" position. the bolt should then be released so that you can easily pull it out of the back of the gun.
