90 minutes
About 90mins
It does not take long for it to get enough of a charge for the red lights to work. Plus when the item is plugged in it has power and will work as a controller while it is charging.
it takes about 3 hours from a full dead battery, A full charge lasts around 28 hours. Source myps3.com.au
To recharge your xbox 360 wireless controller you need to buy a play and charge kit(highly recomended) then plug it into the front of the controller and into one of the controller ports then turn on your console and play while it charges.
you plug it in to the same charger (the one with the wire coming out of the ps3)that you use to charge the normal controller. However, if you have a stand charger ( one that can charge multiple controllers at a time), do not use this to charge move controllers as it will damage the connection when charging.
couple hours
90 minutes
About 90mins
Approximately 3 hours.
Plug it into your PS3 with USB cable. The console needs to be on to charge the controller.
Even during use, it should fully charge in about 2 hours.
A charge controller is a regulator that you used to keep batteries from overcharging as well as undercharging. You need to keep batteries that are in storage charged so a charge controller will help to keep them at the right charge level.
Push the PlayStation symbol on the controller
It can take a few hours depending on how run down it is.
You can use the USB cable that came with the PS3 for charging the Dual Shock controller to also charge the Move controller. However the Dual shock controller could charge while you played and the Move controller is not supposed to be plugged in while using it.
A charge controller is a regulator that you used to keep batteries from overcharging as well as undercharging. You need to keep batteries that are in storage charged so a charge controller will help to keep them at the right charge level.