answersLogoWhite

0

How do you sync a wii fit board?

Updated: 4/28/2022
User Avatar

Wiki User

15y ago

Best Answer

you first have to flip over the board and open the battery compartment then you will see a little red button. Then go to your wii and open the compartment where you put your SD card ( in the front) and press the red button. go back to the board and press the red button you found earlier and press the button. if you do not see the blue power light flashing in the back of the balance board, you need to replace your batteries

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you sync a wii fit board?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Games

How do you connect your Wii fit board to the Wii?

To connect the Wii Fit Balance Board, you first need to make sure that you have four Double A batteries. Go onto Wii Fit or Wii Fit Plus and it should ask you to sync the board. Open the battery compartment on the board and open the SD card slot on the Wii. Press Sync (the red buttons) on both of them until they recognize each other (it will say on the screen). Eventually it will ask you to press the power button on the Wii board. Press power on the front of the board, and it is then connected. Hope I was able to help!


How do you synchronize the Nintendo Wii with the Wii fit board?

you first flip the wii board upside down. take off the cover where the batteries are press the sync button then while the bar in the front of your wii fit blinks blue you open the front cover on the wii console underneath the power button press that sync bar after going onto the game part after turningyour wii on and it should just start up for you. after that go to wii channel press wii fit> start> then hit bar in front of fit board


How do you sync the Wii fit board to the Wii?

Open the battery compartment under the board and push the red sync button. Now open the flap on the front of the Wii and press the red sync button there. Hopefully the two should sync - you'll know if its connected if the blue light on the board comes on and I believe the board comes up as controller 4 if you push the home button hope that was of help


Can you have more than one wii fit board connected to the wii system?

nope, one per wii. and your 4th synced controller, will not work, unless u sync it, as the wii blance board will take the place of that controller


Wii fit board light flashing but board not working?

Try pressing the sync button on the console and on the board if it doesnt work first time press them both for five seconds and keep trying

Related questions

How do you conncet the Wii fit bored to the Wii?

The wii fit board must be sync-ed with the wii before it will work. In order to do this take the USB/charger cable that comes with the fit board and connect it to the fit board (on underside, battery compartment) and wii (USB port at rear). Once connected you must depress the sync button at the battery compartment of the fit board and the sync button located under the flap at the front of the wii.


How do you connect your Wii fit board to the Wii?

To connect the Wii Fit Balance Board, you first need to make sure that you have four Double A batteries. Go onto Wii Fit or Wii Fit Plus and it should ask you to sync the board. Open the battery compartment on the board and open the SD card slot on the Wii. Press Sync (the red buttons) on both of them until they recognize each other (it will say on the screen). Eventually it will ask you to press the power button on the Wii board. Press power on the front of the board, and it is then connected. Hope I was able to help!


How do you synchronize the Nintendo Wii with the Wii fit board?

you first flip the wii board upside down. take off the cover where the batteries are press the sync button then while the bar in the front of your wii fit blinks blue you open the front cover on the wii console underneath the power button press that sync bar after going onto the game part after turningyour wii on and it should just start up for you. after that go to wii channel press wii fit> start> then hit bar in front of fit board


How do you sync the Wii fit board to the Wii?

Open the battery compartment under the board and push the red sync button. Now open the flap on the front of the Wii and press the red sync button there. Hopefully the two should sync - you'll know if its connected if the blue light on the board comes on and I believe the board comes up as controller 4 if you push the home button hope that was of help


Can you have more than one wii fit board connected to the wii system?

nope, one per wii. and your 4th synced controller, will not work, unless u sync it, as the wii blance board will take the place of that controller


Do you need a board for Wii fit?

yes you need a wii fit board to play wii fit


Wii fit board light flashing but board not working?

Try pressing the sync button on the console and on the board if it doesnt work first time press them both for five seconds and keep trying


Do you have to have a Wii balance board for Wii fit plus?

Yes It Is impossible to play Wii fit plus without the Wii balance board.


How much weight does the wii fit board hold?

The weight limit for the wii fit board is 330 pounds. If the a weight above this limit is placed on the board, a message will be will be displayed that the wii cannot weight what's on the wii fit board.


Do I need to buy games to use the wii fit balance board?

Um the balance board come with wii fit but there is a games called skate it for the wii that is wii balance board compatible


Do you need Wii fit boared to play Wii fit game?

Yes, you need the wii fit balance board to play wii fit or wii fit plus.


Can you add more than one wii fit board to the Wii fit game?

Yes you can! Because, if you go on Home you will eventually be able to connect the Wii Fit Board just by pressing the first button on the Wii Fit.