Yes. Any Wii remote will work on any Wii console, regardless of color
Yes the controlers are not regon locked
Yes, the original Wii games can be played by using a Wii Motion Plus Remote
No, a British console will only work in Britain and Europe.
You should re-sync it by1.taking off the battery cover2.taking off the plastic flap near the disc slot at the front of the wii3.press the red button inside your wii and hold for 15 seconds4.press the button on your wii remotethis should work. If not so, make sure the wii sensor bar is plugged in properly.or i found this on nintendo.com in supportMost Common: Wii Remote not being recognized by the Wii Console (lights on the Wii Remote flash when you press a button, but then go out) - Getting the Wii console to recognize (or "sync" with) a Wii Remote, especially one that did not come in the box with your Wii console, may require doing a few additional steps before it can be synced. Additionally, a Wii Remote that was working, but is no longer being recognized (or has "lost its sync") may need to be re-synced. Please use the troubleshooting steps listed below, which our experience has shown can solve many Wii Remote issues.Try these steps!Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes: With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.If you are still unable to get the Wii console to recognize your Wii Remote(s) after carefully following the steps above, please call 1-800-255-3700 for further assistance.
The console will work. (Make sure you have a transformer for the voltage.) But you'll need to buy all your games in the UK.
For the wii? I should think so.
this works exelent i tried it and it works on the previous wii console i put all my "Mii's" onto my remote then i transfered them to my new remote it works no worries
Your remote is broken.
Pull up the flap on the console and press sync (the red button). If that doesn't work, take the back off the remote where the batteries are and press the sync button there at the same time as the console button.
Yes the controlers are not regon locked
NES-controller won't work anymore, try the Wii remote.
Most blue tooth headsets able to be paired and work with the Playstation 3 console.
You would have to put in newBatteries. if that does not work, try taking it to gamestop. there could be something wrong with the remote.
No just Wii motion plus controller with normal wii should work There is no motion plus console
if you have the XBox 360 original Core edition, it can only use wired remotes. if you have a more recent version, you must first synchronize the remote and console by pressing the wireless contact search button on the remote and console, symaltaniously.
Of course... Wii peripherals work on any type of console its just like plugging in a controller if it fits in the socket or not...