0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which way do you turn the harmonic balance bolt on a 95 Geo Tracker to loosen it?
which way do you turn the harmonic balancer bolt on a 95 geo tracker to loosen it
What way does the harmonic balancer bolt turn on a 61 ford 170ci 6cyl to remove?
Counterclockwise
What direction do you a turn bolt on a harmonic balancer on a 2001 Honda accord to take off?
Counterclockwise.
Which direction do you turn the harmonic balancer bolt on a 1996 Sebring 2.5L engine to remove it?
You turn it counter clockwise to loosen.
What way do you turn the harmonic balancer bolt on a 2000 dodge neon?
Clockwise to tighten, counter to loosen.
Which direction do you turn to loosen the bolt on the harmonic balancer on a 1995 Chrysler LeBaron GTC?
counter clockwise
What way does the harmonic balancer bolt turn on a 96 ford contour?
Counter clockwise. To the left. Lefty loosy.
Toyota 4 runner 1990 harmonic balancer bolt turn?
The harmonic balancer on a 1990 Toyota 4 Runner is turned clockwise to loosen it. This is backwards from most bolts to prevent it from being loosened by the rotation of the engine.
94 dodge caravan how do you remove the harmonic balancer which way do you turn the bolt to loosen?
lefty loosey righty tighty:)
How do you remove the harmonic balancer on a 94' Ford F150 5.0L 302?
I have not taken one off a 74 specifically but every one I have done required a Gear Puller. The puller will bolt to the Harmonic Balancer and the center bolt sets on the head of the Crank Shaft bolt. As you turn the center bolt in it will pull the balancer off.
Can a rusted harmonic balancer cause the engine not to turn over?
No, a rusted harmonic balancer will not prevent the engine from turning over.
How do you remove the harmonic balancer in a 1995 Nissan Maxima GLE?
Start by removing the right front tire and support the vehicle with a jack stand. Then remove lower portion of the splash guard near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tensioner and then loosen the tensioner bolt (it is the one that's sticking straight up, you use a 14mm socket on it.). The power steering adjuster bolt will be accessed from the bottom near the power steering pump. It has a 12mm bolt head on it. You will break the jamb bolt loose first and then loosen the adjusting bolt. Remove belts. Then remove harmonic balancer bolt (19mm). If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not tighten it. Leave it about a half inch from being all the way in. Next place the puller on to the harmonic balancer. (one finger on each side securely press into the belt groove.) The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this point.
