torque settings for mains,big ends and cylinder head Opel Corsa 1.7diesel 2000
torque specs in Nm and tightening esquence
The torque settings for a Renault Megane 1.6 16-valve engine typically include cylinder head bolts torqued to around 20 Nm (14.75 lb-ft) initially, followed by an additional 90 degrees turn, and then a further 90 degrees turn. For other components, such as the oil pan and intake manifold, torque settings may vary, so it's essential to consult the specific service manual for the exact figures. Always ensure to follow the manufacturer’s guidelines for accurate torque specifications.
For a Nissan Micra 1.4 16-valve, the torque settings vary depending on the specific component being worked on. Generally, for the cylinder head bolts, a common torque specification is around 10-12 Nm (Newton-meters) for the initial stage, followed by a final torque of approximately 90 degrees turn. Always refer to the vehicle's service manual for the most accurate and detailed specifications.
Good morning I have a 2014 peugeot 207 1.4 16 valves I need the torque spec on a head cylinders please
Astra f 1800cc 16v renew bolts 25nm 90 degrees 90 degrees 90 degrees
Les mains libres was created on 2010-06-16.
rod cap bolts 11/32" bolts---30-35 ft. lbs. torque(1/2" nut) bolts 3/8"--(-9/16 nut)---40-45 ft. lbs. torque mains----70 ft.lbs. torque torque specs. are the same on 2 or 4 bolt blocks.
Seeings how no 1 will answer this , I'll will, Rod cap nuts are tourqued at 36 ft pounds , Mains are 46 ft pounds
Just really want to know the timing belt settings please?
16 valve
years 61-63 rods are 20-25 ft/lbs mains are 42-48 ft/lbs for 7/16" bolts and 7-13 ft/lbs for5/16" bolts years 96-2002 rods are 18 ft/lbs +90* mains are 15 ft/lbs+90*