Access like carry the single vlan information & Trunk link able to carry the multiple vlan information when frames are travels from trunk
mani shanker
• Access link: An access link is a link that is part of only one VLAN, and normally access links are for end devices. Any device attached to an access link is unaware of a VLAN membership. An access-link connection can understand only standard Ethernet frames. Switches remove any VLAN information from the frame before it is sent to an access-link device.• Trunk link: A Trunk link can carry multiple VLAN traffic and normally a trunk link is used to connect switches to other switches or to routers. To identify the VLAN that a frame belongs to, Cisco switches support different identification techniques (VLAN Frame tagging). Our focus for CCNA examination is on Inter-Switch Link (ISL) and 802.1Q.A trunk link is not assigned to a specific VLAN. Many VLAN traffic can be transported between switches using a single physical trunk link.
dynamic auto - dynamic auto
The word link refers to the physical path. The word channel refers to the portion of a link that carries a transmission between a given pair of lines. One link can have many (n) channels.
We know a database is one that stores data related to each other. A network database is just like network database only difference between them is, in network database records are connected by means of a link.
MAC function is framing of packets and LLC functions are protocol multiplexing, flow control, detection, and error control through a retransmission of dropped packets.LLC acts as an interface between MAC and Network Layer.The following definitions are also true:Logical Link Control (LLC). This sublayer is responsible for the data transmission between computers or devices on a network.Media Access Control (MAC). On a network, the network interface card (NIC) has an unique hardware address which identifies a computer or device. The physical address is utilized for the MAC sublayer addressing.
• Access link: An access link is a link that is part of only one VLAN, and normally access links are for end devices. Any device attached to an access link is unaware of a VLAN membership. An access-link connection can understand only standard Ethernet frames. Switches remove any VLAN information from the frame before it is sent to an access-link device.• Trunk link: A Trunk link can carry multiple VLAN traffic and normally a trunk link is used to connect switches to other switches or to routers. To identify the VLAN that a frame belongs to, Cisco switches support different identification techniques (VLAN Frame tagging). Our focus for CCNA examination is on Inter-Switch Link (ISL) and 802.1Q.A trunk link is not assigned to a specific VLAN. Many VLAN traffic can be transported between switches using a single physical trunk link.
The difference between a link and an interface is the protocol used.
dynamic auto - dynamic auto
For a link to become an access link between two adjacent switches, both switches must be configured with the same DTP (Dynamic Trunking Protocol) mode. This can occur when both switches are set to "access" mode or when one switch is set to "dynamic auto" and the other to "dynamic desirable." In either case, the link will not form a trunk and will operate as an access link, allowing only untagged traffic.
A trunk
A link is what you click on on your computer. A menu is what you get when you're at a resturaunt.
link is the character you play as but Zelda is the princess you have to save
Technology wise there is no such difference.
12
See the Related Link below.
VLAN tagging using 802.1Q protocol.
By default, all defined VLANs are allowed on the trunk.