Pull pump action back. screw the knurled part at end of stock to loosen it. Remove barrel. Turn knurled part all the way off and plug and spring should come out. Replace spring and replace knurled part. Replace barrel and you're ready.
To remove the plug from an Ithaca Model 51 autoloader shotgun, first ensure the firearm is unloaded and pointed in a safe direction. Disassemble the shotgun by removing the barrel and then locate the plug, which is housed in the magazine tube. Use a flathead screwdriver to unscrew the retaining screw if present, then carefully pull the plug out of the magazine tube. Reassemble the shotgun once the plug is removed, ensuring all parts are secure.
Best left to a trained gunsmith.
Remove the 2 screws from the end or the mag tube and the cap and spring will come out. Do so carefully as the spring is compressed
To remove the plug from a Winchester Ranger shotgun, first ensure the shotgun is unloaded and pointed in a safe direction. Then, locate the plug inside the magazine tube, usually accessible by unscrewing the end cap or the magazine cap. Once the cap is removed, you can slide the plug out from the magazine tube. Reassemble the shotgun by securely replacing the cap.
Take a screw that will fit tight in the hole in bottom screw it in tight and pull out the plug with a long screwdriver remove the screw
Best left to a gunsmith
While hunting, yes. Otherwise, no.
Remove the cap from the end of the tube and be careful of the spring which is under pressure. The plug will come out with the cap.
Best to ask a gunsmith for help.
If you are referring to the magazine tube plug. The answer would be No. It is put there for bird hunting regulations only.
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
To remove the magazine plug from a JC Higgins Model 20 shotgun, first ensure the firearm is unloaded and pointed in a safe direction. Locate the magazine cap at the end of the magazine tube and unscrew it counterclockwise. Once the cap is removed, you can pull out the magazine plug from the magazine tube. If necessary, use a small tool to gently push it out if it’s stuck.