0
You can tile over existing tile although it isn't reccomended. You would be safer by removing the tile and then installing the new tile. But, if you wanted to tile over existing tile you would have to make sure all the tile is even and not lose. If the tile is lose or uneven it will caused the new tile and grout to crack or pop out.
What else can I help you with?
Do you use thin set if the tile is going on top of a laminate?
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
How do you install ceramic tile over ceramic tile?
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
Can you install laminate over ceramic tile?
No, you should never do that, it will defeat the purpose of having ceramic tile and it does not look good.
Shower Tile?
form_title= Shower Tile form_header= Redo your shower tile and create a whole new bathroom look! Do you have tile that needs toe removed?*= () Yes () No () Not Sure What color tile do you what installed?*= _ [50] What are the dimensions of your bathroom?*= _ [50]
Do you install tile or hardwood first?
I have done this and I always have the hardwood installed first. Then I install the ceramic tile. To protect the hardwood floor from getting grout or glue on it I cover the hardwood floor with a soft cover (to prevent scratches) and tape it down. Then place a plastic cover over the hardwood. Then I can install the ceramic tile at the edge of the hardwood creating hardly or no seem and level with the hardwood. When its done it looks beautiful.I would install the tile first , that way you don't risk getting glue or grout on your hardwood.
How do you rough up the old tile to install new tile on top of it?
I have never covered up floor tile before without removing the old tile but I have covered up an old back splash with new wall tile and did nothing to go over it just used the white pre mixed wall glue to install the tile right over top with no issues.
How do you install tile over acrylic paint?
To install tile over acrylic paint, the paint must be sanded so that the surface is rough instead of smooth. Then the paint must be wiped down so that there is no paint dust remaining, after which the mastik for mounting the tile can be applied.
Can you lay ceramic tile over existing tile?
yes. Clean tile with a commercial degreaser. scar the surface with a hand sander. mop with clean water, and let dry. Install with fortified thinset.
Can you install vinyl tile over ceramic tile?
Only if the vinyl was previously installed over concrete, and has a positive bond. Scar the finish of the vinyl with a hand sander (course paper), and use a high strength thinset for the installation.
Can you install travertine tile over hardwood floors?
This is not a good idea without using a cement /mortar board underlayment.
Can you install wood over bathroom wall tiles?
You can but it wouldn't be to easy. My dad does construction and remodeling and if you do this you would have to use a strong adhesive because it could pop loose because of the tile. It would just be easier to remove the tile yourslef and then install the wood flooring.
Can you install laminate floor over ceramic tile?
In my opinion, no it will swell.In my opinion, yes you can install laminate over tile if the tile is in good condition/stable and even. You would first put underlayment above the tile and then the laminate on top. (you always add underlayment before laminate). It is important, though, to make sure you have enough clearance for the doors (you may need to shave the doors). If it's a kitchen, you also want to make sure there is enough clearance for the appliances.
How do you install brick tile to wall?
Very Carefully !
The cost to install floor tile for 528 sq ft if the tile is 2.75 a tile?
tile is usually 12"x12", but you need to factor in the cost of grout and labor if you are not doing it yourself. $2.75/tile x 528 tiles = $1452 install @ $5-10/SF = $3000-5000 depending on conditions and material required
How can you install tile without grout lines?
No, the grout allows for tile expansion and contractions, without it your tile could crack but there are some tile that can be installed with minimal (1/16inch) grout lines.
Installing tile on plywood?
I don't recommend it. The plywood is flexible and bends over time. Cover the plywood with Hardi Backer board first. Available in the tile department at Lowe's and Home Depot. Get the right screws for it. It's easy to install, comes in manageable size of 3 feet by 5 feet. Well worth the time, effort and money to make sure your tile job lasts.
How much does it cost to install porcealin tile?
Average in Southeast is $3 - $3.25 per square foot. Anything better than that is a good deal. I install tile in the Opelika, AL area.
