You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
Yes, you can but you need to staple a mesh to it. Then fill the mesh with thin-set and let it dry before putting your tile down with thin-set.
Yes, referred to as "back buttering". Also may want to consider mastic rather than thin set on the walls. Tile won't slide after you set it.
Depends on the size tile you use. 12" tile on the floor I use a 1/4"x1/4" square notch trowel to spread my thin set. Larger tile require 1/4" x 3/8" square notch trowel. Wall tile usually needs a 3/16" x 5/32" V notch trowel. You will want to check the bag of thin set and with a professional in the store. Some tiles have different requirements.
I wouldn't recommend it. Most wall tiles are very smooth and wouldn't have any grit for the thin-set to adhere to.
Yes it may be used with certain porcelain tile made in the USA modifiers can be added for others.
Thin set mortar? It is what you use to lay ceramic tile.
Yes, you can but you need to staple a mesh to it. Then fill the mesh with thin-set and let it dry before putting your tile down with thin-set.
You are correct! The tile will sound hollow when the thin set isn't hardened. When the thin set hardens the tile should sound much more solid.
If you want to install a glass tile that are easily found from stores you need to follow some instructionsMeasure the layout of backlash where you want to install that glass tileThen use a thin set to wall with a notched trowel. Mix and Apply Thin-Set MortarUse that tile on that thin setGive the design of that tile which you want by cutting and polishing
Yes, referred to as "back buttering". Also may want to consider mastic rather than thin set on the walls. Tile won't slide after you set it.
Yes, use a good thin-set cement.
Depends on the size tile you use. 12" tile on the floor I use a 1/4"x1/4" square notch trowel to spread my thin set. Larger tile require 1/4" x 3/8" square notch trowel. Wall tile usually needs a 3/16" x 5/32" V notch trowel. You will want to check the bag of thin set and with a professional in the store. Some tiles have different requirements.
Thin set cement.
I wouldn't recommend it. Most wall tiles are very smooth and wouldn't have any grit for the thin-set to adhere to.
Yes it may be used with certain porcelain tile made in the USA modifiers can be added for others.
The question is not clear in respect of scenario. However, the base the tile is to be fixed should be level and sound. The fixative should be correct for the environment the tile is to be used in i.e. water proof in a bathroom. The surface for fixing to should be of a nature that allows the fixative to adhere correctly. The information for this is supplied by the manufacturer.
will muriatic acid aid in removing thin set from the back of ceramic tiles with out damage