Yes you can install vct over existing vct. The existing vct must be well adhered to the subfloor, no loose tiles or cracked and chipped tiles. If tiles are missing or must be removed you will need to patch in those spots with a suitable portland cement leveler or new pieces of vct. You will need to sand off the wax layer that may be present on the existing vct because if it is left on it can wear loose over time causing adhesion failure of the new vct and glue. Sweep all dust and contaminants from the floor.
You would be putting a permanent floor over a temporary floor & that would not be wise. Might work but if it doesn't you lose it all...
no answers? huh... this is a great site.. ;[
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
You can tile over existing tile although it isn't reccomended. You would be safer by removing the tile and then installing the new tile. But, if you wanted to tile over existing tile you would have to make sure all the tile is even and not lose. If the tile is lose or uneven it will caused the new tile and grout to crack or pop out.
In this instance VCT stands for Vinyl-Carpet- Tile ! If a spec says to install a VCT Floor, it is poorly written, however it reflects an intention of having one of these types of finishes on the completed Project..
You would be putting a permanent floor over a temporary floor & that would not be wise. Might work but if it doesn't you lose it all...
The weight of VCT (Vinyl Composition Tile) can vary depending on the thickness and size of the tile. On average, VCT tiles typically weigh between 1-2 pounds per square foot.
The cost to lay down a luan sub floor is $15 per sheet, and this would include the material.
no answers? huh... this is a great site.. ;[
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
yes
Yes.
You can tile over existing tile although it isn't reccomended. You would be safer by removing the tile and then installing the new tile. But, if you wanted to tile over existing tile you would have to make sure all the tile is even and not lose. If the tile is lose or uneven it will caused the new tile and grout to crack or pop out.
Yes
I have never covered up floor tile before without removing the old tile but I have covered up an old back splash with new wall tile and did nothing to go over it just used the white pre mixed wall glue to install the tile right over top with no issues.