answersLogoWhite

0

The oil capacity on a Honda Rancher 420 is to quarts or four pints. Honda recommends using 10 W 30 motor oil.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the oil capacity of a Honda rancher 420 fe?

The oil capacity of a Honda Rancher 420 FE is approximately 3.5 quarts (or about 3.3 liters) when including the oil filter change. It's important to check the owner's manual for specific guidelines and ensure proper oil levels for optimal performance. Always use the recommended oil type for best results.


What is the oil capacity of a Honda 420?

3 Quarts


How much oil does a 420 Honda 4 wheeler take?

Rancher 420 holds just under 3 quarts


Where do you add transmission fluid to 2007 Honda 420 rancher?

The transmission shares the engine oil.


What is the rear end oil capacity for Honda Rancher?

you are so dumb!


What is the engine oil capacity for 2005 Honda rancher 400 at?

3.1 qt


How many quarts of oil does a 2008 Honda rancher 420 hold?

The 2008 Honda Rancher 420 typically holds about 3.2 quarts of oil when using an oil filter and approximately 2.9 quarts without the filter change. It's always best to check the owner's manual for the specific model to ensure accurate maintenance practices.


What is the oil capacity of a 2007 Honda rancher es?

The oil capacity of a 2007 Honda Rancher ES is approximately 3.2 quarts (or about 3 liters) when using an oil filter. If you're changing the oil without replacing the filter, the capacity is slightly lower, around 2.9 quarts (or about 2.7 liters). Always refer to the owner's manual for specific recommendations and guidelines.


What oil filter do you use for a Honda ATV 420 rancher?

For a Honda ATV 420 Rancher, the recommended oil filter is typically the Honda 15400-PLM-A01 or an equivalent aftermarket filter that meets the same specifications. It's essential to ensure that the filter fits properly and is compatible with the engine to maintain optimal performance. Always refer to your owner's manual for specific part numbers and maintenance recommendations.


What oil does and Honda Rancher 420 use?

The Honda Rancher 420 typically uses 10W-40 or 10W-30 engine oil, depending on the climate and operating conditions. It's essential to use a high-quality oil that meets the API service classification of SG or higher. Additionally, for optimal performance and longevity, it's recommended to use Honda's own oil or a compatible synthetic oil. Always refer to the owner's manual for specific recommendations based on your model and year.


What is the oil capacity for a Honda rancher 250?

The oil capacity for a Honda Rancher 250 is approximately 2.5 quarts (or about 2.4 liters) when including the oil filter change. Without the filter change, the capacity is around 2.3 quarts (or about 2.2 liters). It's important to use the recommended oil type and regularly check the oil level for optimal performance. Always refer to the owner's manual for specific maintenance information.


What type of transmission oil go in 2006 Honda 400 4x4 rancher at?

2004 Honda rancher tranimission oil