is this question a joke? You connect the Yellow red & white to the projector!! and move the sensor bar to the bottom of the projected image just like a TV
if by console you meen cheat menu or stuff where you type stuff into it. its Ctrl+Shift+C, to exit it just press esc
During gameplay press [ctrl]+[shift]+C to open the cheat console and type "motherlode".
Easy peasy! If you are british, click the @ button but don't hold shift If you are american, click the ~ button If you are anything else, it is either of them.
To put cheats in press SHIFT+~ to bring down the console. Then type in helpusobi 1 and press enter. After that, type in your cheat(for multiplayer put a / before the cheat).
Go to your neighborhood, select a family YOU Have already created and before you go into the family's home put the cheat console (white box that appears) by pressing Ctrl+Shift+C (Without the Plusses) then go into the lot of your choice. after the loading screen there are tons of more actions than normally. shift click an object by holding down shift and then you will have access to these actions. you cannot create an entirely new npc, but if you shift click the mailbox, you will see an action to "Make NPC" and there are thousands of selections of npc's to choose from. Good Luck!
I'm wondering the same thing i figured id go online and i bought a VGA cable that connects to the yellow red and white wires. Well i plugged it up and went to connect a projector and also tried using multiple monitors in Windows 7 but it still wont work.. If i figure a solution ill let you know :/
The shift solenoid is under the console in the shift assembly.
Begin by removing the 2002 Jeep Liberty shift console retaining bolts. Lift the shift console up and the light bulb will be visible. Take hold of the light bulb, push in and turn at the same time to remove it. Reverse the process to install your new shift console light bulb.
Are you asking about the shift lever on a column shift car or the console shift handle?
You take the console out and then the shift interlock solenoid is easily put in. A piece of cake once you get the console off.
Just remove the console and you can get to it.
You have to remove the entire center console and the pop up the gear shift box (ver carefully) you then connect the wires and screw the cigarette lighter in.
If the light for the gear shift on the console does not work on a 2002 Toyota Camry, it is probably a burned out bulb. The console will need to come off to access the bulb to change it. This part is held onto the console area by screws.
To remove the console shift knob on the AT 1993 Olds Achieva, first pry the cover from the top of the shift knob. Then, access the single screw inside the cover of the shift knob and turn it counter-clockwise to release the knob.
how to replace the light bulb on the gear shift on 2004 tracker
hook up ur vcr to the projector with rca cables then pulg the cable into the vcr and then switch the vcr to screen mode
if you dont have a slot on console you have to pop remove the center console plate on top there a release under there