How can you reseal video games?

Answer 1

1. First thing you need is to go and get some commercial grade clear packing tape.
2. Then you need hard type clear cellophane the kind used for crumpled party favors, a hairdryer, a nontoxic glue stick, q-tips or cotton balls, and some petroleum jelly (unscented) the kind with alcohol as it will need to evaporate the excess.
3. You will need to lay out the cellophane like your wrapping a present only overlapping ma-by 1/2 an inch on all sides be sure to crease it so you can match it up after.
4. Now using a Q-tip or a cotton ball dampen it so the petroleum jelly wont stick to it.
5. Spread it evenly all over the cellophane about 1/2 a mill thick all over, this will allow for a perfect alignment when sealing.
6. Now clean the box with Rubbing alcohol and cheese cloth to remove any lint or dust.
7. Place the box carefully onto the cellophane.
8. Line up all the creases and use a piece of the packing tape to temporary hold it in place.
9. Use a glue stick and run it down the seams wiping off the excess with a tissue.
10. Make sure all seams are as snug as possible and now using a hair dryer (a heat gun is too hot) with the heat on low blow the box till it seals and shrinks up nice and tight.
11. This may take a few minutes to work as you won't want to melt the cellophane.
12. Wipe it down, then you're done.