Remove the 2 lower dashboard panels in the drivers footwell and you will be able to see the top hinger mechanism of the brake pedal, right at the top there is a thin strip of metal that moves back and forth about an inch when the pedal is pressed, behind that you can see the switch, a small black plastic unit Not nice to find or fit i may add JK
MG ZT was created in 2001.
Lift the mg zt at one wheel. With the vehicle safely held up, remove the wheel. Remove the brake caliper, and take the pads off. The disc needs to be checked for grooves or wear. If the disc is worn then remove and replace it.
No manufacturer currently produces the MG ZT. Production was stopped in 2005. When they were in production they were manufactured by MG Rover in Longbridge, Birmingham, England.
MG ZT or ZT-T V8 Models Only 2003 - 2005
There are a number of sites where one might find an MG ZT for sale depending on what country one is located. These appear to be much more common in the UK but they can be found on the Autotrader site as well as Gumtree.
An MG ZT can be purchased through a variety of sites. The best sites include Parkers UK and Auto Trader UK. Auto Trader UK has the largest range of cars available.
The clutch cable has proabably broken.
the wire that goes to the pad will have a positive and a negative wire. make sure that the original brake pad's wire is still plugged in, but cut the wire just short of the old pad and isolate each wire so they don't touch. when that circuit is completed, your brake wear indicator will light up
Co zt court order mean
CO ZT (Court Order )
where is brake light switch
The brake switch is located on the brake master cylinder!