How do you disable a passtime device from a truck?

Answer 1

I don't credit for this just passing it along it worked for me the whole time I was paying payments. the only thing i did different was instead of cutting the wires and splicing them i just pulled back some sleeve on both pieces and added a third wire so that it would connect the two. The dealer will have no idea that this has been done they will still get their signals like everything is normal.

here it is good luck*****

The device is located up underneath the dashboard. It consists of 5 wires. Red is a constant 12volt power wire. Black is a ground Wire. Pink is the ignition switch wire. Purple and blue tie into the starter wire. Basically when the key is turned on power from the starter flows into the box. if your time has expired then the device will not let power flow out of the box to the starter, thus preventing you from starting the vehicle. Simple removal to leave the box in tack is to cut the blue and purple wires from the end of the harness (where it plugs into the box) and splice them together via butt connectors or other type of connection. Now regardless of the time left on the box, if any the vehicle will start. The box will still have power and chime and ring when you enter codes or it is "shut down" but will no longer have an effect on the vehicle starting.