Loosen the bolt on the top of the injector for cylinder #1, located on the left side front of the engine, under the fuel tank. Prime the system with the manual pump located on the right side of the tractor to the rear of the fuel filter and above the starter. Prime until clear fuel without air spills from the injector. Repeat for injectors 2 and 3. If you have someone to crank the engine, you can close and open each injector repeatedly. Close the injector, build pressure, then release. It takes a while, stay with it.
bleed injectors and USE DIESEL
Get your local mechanic to bleed the injectors
Loosen the injector lines at the injectors not the pump then crank the engine till there is fuel at the injectors then retighten the lines.
i know with diesel engines if you run out of diesel, or change any part of your fuel line you will need to bleed your injectors to get it to run. you may have to bleed them all before it will run.
without seeing it the easy way would be at the pressure hose on the stering cylinder
if its electronic pump and injectors it will self bleed, if not electronic u need to drag it to get the diesel round the pipes, get someone to tow u round the block and bump it.
how do you bleed a diesel peugeot cooling system
The fuel injectors are self bleeding on a 1996 Chrysler Town and Country.
They are self bleeding.
1. undo the bleed valve on top of the sediment bowl, and pump the primer 10 times then close the valve. 2. open the bleed valve on the 1rst fuel filter, (top valve) repeat pumping. close valve. do the same to the bottom valve on the 1rst filter. 3. do the same to the secondary filter. 4. open the valve on the fuel pump(under the injector lines) pump and close it 5. do the same to the bottom valve. 6. if you have four injector fuel lines(four cylinder) undo two lines at a time and turn the key until straight diesel comes out, then reattach line. repeat with other two. then start the tractor. if it doesn't work, you may have more air in the lines or another problem.
bleed fuel line ford diesel 250 pickup 2005 how does one bleed the fuel lines in that truck ?
Bleed the fuel lines at the injectors, driver's side of the head, by cracking them open and turning the motor. Video in the link.