This will not fit a model 12
Same choke tube as a 1200 or 1400 pump
I own a sears model 200 that is in bad need of a new stock. Like I am sure you know the gun was actually produced by Winchester and most of the parts are interchangeable with the 120/1200/1300 and some 1400 parts. However, to my knowledge there are no true Winchester stocks that fit directly on the Sears. They modified the rear of the chamber housing and the trigger group. The only other means I know of is that Winchester also labeled Ted Williams shotguns of the era and their construction is very similar. Be wary of swapping stocks even amongst sears labeled guns a model 300 stock will not work on a model 200, at least not without modification.
No, a magazine extension for a Winchester 1200 shotgun will not work with a Winchester 1300 shotgun. The Winchester 1200 and 1300 have different magazine tube designs and dimensions, so they are not interchangeable.
brand new with all paper work and box in unfired condition is $1200 to $1400
Winchester 30-30 by any manufacturer will work for you.
At this time no,there are not any available.You could have a model 1300 slug barrel redone and have the gas ports added to this barrel.Then it will work fine in your model 1400 Winchester shotgun.
This Winchester model number was manufactured in 1955. This is not as old as I thought it would be. There are many websites out there that say they can help determine the date of manufacture. Most of them didn't work.
While I cannot advise you to do this,I would advise you to have a gunsmith do the work for you.
7% of 1200 = (7/100) of 1200 = (7/100) * 1200 = 84
Yes.Any qualified gunsmith should be able to perform this work for you.
Tech rep at Brownell's says yes . . . I just ordered one.AnswerDo you mean 1200? Brownell's Tech Rep says it will interchange with the 1300. I just ordered one. Yes the Winchester model 120 is a varient of the model 1300 the only real difference is the type of furniture they put on the model 120. I own one and have an extension tube for mine. Just remember that extension tubes were great but the barrel band that comes with them can damage the finish on your barrel.
There is no carbrurator on a stock 88 350 as they went to tbi fuel injection in 87.Answerbut IF there is.. its most likely a Winchester 750 cfm carb.. nice carbs when they actually work right