0
What should the trigger pull for a 270 caliber Husqvarna be set at?
Wiki User
∙ 14y ago
4 lbs
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is a DAK trigger on sig sauer 40 caliber pistol?
A consistent 6.5 pound double-action only trigger pull.
How many times can a person pull a trigger on a semiautomatic weapon in one second?
It will depend on the caliber, the trigger and the type of semi-auto action.
How do you adjust trigger pull on ruger ranch rifle caliber .223?
Best left to a trained factory representative.
Browning Auto 5 what is the standard set for trigger pull-lbs How is it adjusted?
The trigger pull should only be adjusted by a trained gunsmith. Browning does not publish trigger pull weights.
How do you remove the bolt from a husqvarna 9000?
When the bolt stops moveing as you pull it back pull and hold the trigger back and continue pulling the bolt. If it doesnt come out, push the bolt forward a little then pull trigger back, etc.... To re-install set left side locking lug in groove on rear of receiver pull and hold trigger back and push in bolt. If unsucessful pull trigger before trying to install bolt. Sometimes the pressure of pushing or pulling the bolt will not let the trigger go all the way back.
What is the average preferred trigger pull range for a military AR15?
The military weapon, AR-15, should have a trigger pull of 5.5 to 8.5 pounds and should be free of creep. Creep is the rough movement between the trigger pull and hammer release.
What do you do with the manure?
You pull down the trigger on the side of the toilet and it should disappear.
38 smith weson hammerlesschange the trigger pull has a heavy trigger pull?
It is supposed to.
How do you adjust Remington 37 trigger?
I have a remingon 37 field service manual weight of the trigger pull may be changed by turning trigger pull adjusting screw to the right , or clockwise for heaver pull off ,and to the left ,or counter clockwise for lighter pull off . adjust trigger adjusting screw rear until lengthwise lap of sear and bolt stop is about .012 " ( gun cocked safe is off ) turn trigger adjusting front screw front in as far as it will go ,then back off until trigger will fire . now back out trigger pull adjusting screw until it is free of trigger spring weight trigger pull . pull should be under 3 lbs. turn in screw until desired pull is obtained . kansasroadrunner@embarqmail.com 03-14-2008
What is a misfire of a gun?
When a loaded firearm fails in an attempt to be fired. When you pull the trigger, it does not fire when it should.
Why should special care be given when using a double set trigger for hunting?
one trigger sets the gun to go off and the other fires it you must squeeze the first trigger then the second to fire the gun and if your not careful and pull the set trigger again instead of the second trigger the gun will not fire plus the second trigger being the fire trigger is usually a hair trigger meaning you barely have to pull it to make the gun fire
How do you remove the bolt from savage mark 2 bolt action rifle?
Pull and hold the trigger, then pull the bolt back and it should release.
