Your Winchester model 1894 was made in 1911.The value of these fine winchesters are getting up there.Depending on the overall original finish remaining on the gun,and if it has any special features(octagon barrel,special wood,takedown version,length of the magazine tube) it could be worth between 750-1900 dollars.I am confused that you say blackpowder in your description thou?While the cartridge was based on 55grs.of black powder.your rifle should be able to handle the smokeless version that is loaded today.I know of many rifles made during that time span that shoot modern loads made today.I would have a qualified gunsmith check the overall condition of your rifle for function and headspace,and ask if it will be able to handle todays modern loads which are kept low in pressure due to the rifles like yours that are out there.
The last reloading manual I have that lists Winchester 450LS powder is the Speer number 8 manual published 1970.
Winchester Business Centre
Depends on which powder is used, and there are several. If using Winchester W748, it would be about 23.5 grains of weight of powder.
such black powder revolvers are anywhere from $150 - $250, depending on condition
was a 38-40 black powder
depending on condition $150 - $250
depends on which powder, and which .44. There were several different catridges with 44 in the name.
It was used for heavy field loads. 1 3/8 or 1 1/2. HS7 is kin to Winchester 571.May even be same powder.
$100 in good condition $125 in great condition $150 in Excellent Condition
10-100 usd
I did some research on my Jukar and they run from about $100 in fair condition to $150 in brand new condition. You have to remember, even though it is a black powder gun, that doesnt mean it is really old.
To load .22 Winchester 290 cartridges, start by gathering the necessary components: .22 Winchester 290 cases, appropriate primers, powder, and bullets. Clean the cases and ensure they are in good condition. Measure and pour the correct amount of powder into each case, then seat the bullet to the recommended depth, ensuring it is secure. Finally, check each cartridge for proper seating and crimping before storing or using them. Always follow safe reloading practices and consult a reliable reloading manual for specific measurements and guidelines.