The moisture difference between Wood floors and wood sub floors would be 4%
Plywood sub floors are about 12 to 13% here in Northern Calif. and the wood flooring is usually from 7-9 % .Now of coarse moisture and RH plays into the picture too. The ocean & lake areas may have a greater % of moisture in their wood sub floors due to greater RH
There are many advantages of having bamboo wood floors and there are some disadvantages. There is no actual test proving that bamboo wood floors are better or stronger than wood floors. It really just depends on your personal preference.
No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.
Maple and Cherry are the strongest wood and also good choice for hardwood floors. In Spite of this, these hardwood floors gives a pleasant look to your floor.
No, wood floors should have no steam products used on it. These will cause damage to the floor even if they are polyurethaned.
Any wood glue will work great for hardwood floors, but make sure it's compatible with your wood type.
For wood floors, a moisture level of 6-9% is considered acceptable. In drywall, a moisture level below 1% is preferred to prevent mold growth and damage. It's important to use moisture meters to accurately measure and monitor moisture levels in both wood floors and drywall.
Not a good idea because of the moisture that occurs in the concrete.
Wood floors do have certain insulation benefits and properties, but they also retain heat, so there is no significant difference.
The difference is what's under it. Basketball floors are "sprung" wood floors - they'll move up and down with the athletes to cut down on leg injuries. Home wood floors are solidly connected to the underlayment.
Hardwood floors can rise due to excess moisture or humidity in the environment. This can cause the wood to swell and expand, pushing the floorboards upward. Other factors such as leaks or spills on the floor can also contribute to the rising of hardwood floors.
Wood heated in an oven at a constant temperature of 212°F (100oC) or above until its weight stabilizes is considered bone dry or oven dry. That is, it has zero percent moisture content.http://www.clearpower.ie/glossary.html
There are many advantages of having bamboo wood floors and there are some disadvantages. There is no actual test proving that bamboo wood floors are better or stronger than wood floors. It really just depends on your personal preference.
Brazilian cherry wood floors are more durable than American cherry wood floors. This has to do with the fact that Brazilian cherry wood is not the wood of a cherry tree, but of a tree called jatoba.
It is not recommended to use Clorox on wood floors as it can damage the finish and wood over time. It is better to use a cleaner specifically designed for wood floors to maintain their appearance and longevity.
An acceptable moisture content runs anywhere from 4 to 18% depending on a variety of factors including the species of wood, where the wood floor is installed geographically, and the time of year. As a result, most wood used for flooring is kiln dried to 6 to 9% moisture content to assist in keeping it from getting so wet it contracts and so dry it shrinks.
wood absorbs moisture better
No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.