hai,kids it is a very simple question because there is no other question with this this mush easy.so it easy answer.i think now you may got the difference between these two.still you are not clear then refer production technology by PN RAO.okey.
Anyone who has dug a shovelful of wet sand and a shovelful of dry sand will tell you that the wet sand is quite a bit heavier than the dry sand. Dry sand is composed of individual particles with air in the spaces between grains. When you add water to a bucket of dry sand, the water replaces the air. Although the bucket is already full of sand, you can pour in quite a bit of water, adding that much more weight. If you have a choice of which bucket to carry, pick the bucket of dry sand every time!
the answer is atmosphere and trosphere
The weight of 1 liter of sand can vary depending on the type of sand and its moisture content. On average, dry sand has a density of about 1.6 grams per cubic centimeter. Therefore, 1 liter of dry sand would weigh approximately 1.6 kilograms, or 1600 grams. However, if the sand is wet, its density would be higher, resulting in a heavier weight for the same volume.
Dry: Free from moisture or liquid; not wet or moist. Wet: Covered or saturated with water or another liquid. Hope this helped*
The wet mix has moisture in addition to the components that have been used. The dry mix only has the individual components with no moisture or water.
ones wet ones dry - maliik
Good enough to be able to tell the difference between dry hay and fresh green grass.
Anyone who has dug a shovelful of wet sand and a shovelful of dry sand will tell you that the wet sand is quite a bit heavier than the dry sand. Dry sand is composed of individual particles with air in the spaces between grains. When you add water to a bucket of dry sand, the water replaces the air. Although the bucket is already full of sand, you can pour in quite a bit of water, adding that much more weight. If you have a choice of which bucket to carry, pick the bucket of dry sand every time!
Dried edamame are made from younger green soybeans, and soy nuts are made from older beige soybeans.
It depends on the density of the sand, between about 1.4 tons dry, 1.7 tons rammed, dry. Wet sand will be heavier.
The difference between dry chemistry analyzer and the chemistry analyzer is the reagents used.
A dry gallon is frozen.
Dry corn is dry and soaked corn is wet.
what is used to measure dry sand
macular degeneration difference between wet and dry
Damp sand contains a thin film of water around each grain, which acts as a lubricant and reduces friction between the particles. This makes the sand more pliable and softer to touch compared to dry sand, which has more interlocking grains and less lubrication between them.
To find the weight of the water inside the wet sand, we first need to calculate the weight of the wet sand delivered: 135 cubic feet * 120 lbs/cubic foot = 16,200 lbs of wet sand. Next, we find the weight of the dry sand in the wet sand delivered: 135 cubic feet * 100 lbs/cubic foot = 13,500 lbs of dry sand. The weight of the water inside the wet sand is the the difference between the weight of the wet sand and the weight of the dry sand: 16,200 lbs (wet sand) - 13,500 lbs (dry sand) = 2,700 lbs of water.