0
Chilling is the reduction in temperature of the required solvent below than its wet bulb temperature while the rest is considered as cooling i.e. if we are only reducing the temperature of solvent to an extent such that the final temperature is above its wet bulb temperature than it will be considered as COOLING.
Add your answer:
Earn +20 pts
Newton's law of cooling applies to objects that are?
Newton's law of cooling applies to objects that are cooling in a surrounding medium, typically a fluid like air or water. It describes how the rate of heat loss from an object depends on the temperature difference between the object and the surrounding medium.
What are the factors that the cooling constant depend on?
The cooling constant depends on factors such as the material properties of the cooling medium, the surface area available for heat transfer, the temperature difference between the object and the surrounding medium, and the efficiency of the cooling system in removing heat.
What temperature difference should be expected between the indoor line and the permanent suction -line ports on the reversing valve during the cooling cycle?
During the cooling cycle, a temperature difference of around 18-20°F is expected between the indoor suction line and the permanent suction line ports on the reversing valve. This temperature difference indicates proper operation of the system.
Does temperature difference affect heat transfer rate?
Yes, temperature difference does affect heat transfer rate. The greater the temperature difference between two objects, the faster heat will transfer between them. This is described by Newton's Law of Cooling, where the rate of heat transfer is directly proportional to the temperature difference.
What is the difference between rated cooling capacity and the nominal cooling capacity of an air conditioner?
Rated cooling capacity represents the actual cooling output that the air conditioner can provide under specific conditions, while nominal cooling capacity is the manufacturer's stated maximum capacity in ideal conditions. The rated cooling capacity is a more accurate representation of a unit's performance in real-world scenarios.
What is chilling?
Cooling a bottle of wine.
What is the difference between a fridge and a larder fridge?
a larder fridge does not have a freezer/chilling/ice box.
What is the difference between a heatsink and water cooling?
Heatsink uses what they call passive cooling where as liquid cooling systems use active cooling.
What is the difference between a heating curve and a cooling curve?
heating curve is hotter than the cooling curve
A measure of cooling combining temperature and wind speed is called?
This is called chilling effect.
What is the difference between nominal and rated cooling capacity of air conditioner?
What is the difference between rated capacity and the nominal capacity
What is Proper cooling consists of the following methods except?
Proper cooling consists of methods such as refrigeration, ice bath, and blast chilling. Not a proper method for cooling is leaving food at room temperature to cool down.
How do you tell difference between radiator leak or hose leak?
pressure test the cooling system
Newton's law of cooling applies to objects that are?
Newton's law of cooling applies to objects that are cooling in a surrounding medium, typically a fluid like air or water. It describes how the rate of heat loss from an object depends on the temperature difference between the object and the surrounding medium.
Why is your air condition blowing hot air?
1. The possibility that the setting switch is for blower/ fan or for heating and not cooling in air conditioners that have both heating/cooling system.. 2.The chilling compartment /compression of cooling gas has leaked. 3.The compression is weak to chill the cooling compartment.
What are the factors that the cooling constant depend on?
The cooling constant depends on factors such as the material properties of the cooling medium, the surface area available for heat transfer, the temperature difference between the object and the surrounding medium, and the efficiency of the cooling system in removing heat.
What is the difference between metaporphic and igneos rock?
The difference between metaporphic and ignous rock are that ignous rock is formed by cooling of magma and metaporphic is formed by temperature and pressure changes inside the earth
