0
What else can I help you with?
What does a Nintendo 64 tv connection cord look like?
Either an RF cord or and AV cord(the red, yellow, and white cord).
What are the Difference Between AF Amplifier and RF Amplifier?
The amp for audio freq. is a AF amplifier. The RF amp is for radio freqs.
What difference between RF power output watt and electrical power output watt?
The difference is in the output frequency.
Do the advanced interact accessories S-Video/AV Cables provide better viewing for the Gamecube?
Yes, the S-Video cable does improve viewing quality over AV, or RF signal. S-video uses two seperate signals to carry the picture, whereas the AV and RF use one lower quality signal.
How do you calculate gain of an inverting and non-inverting OP-Amp configuration?
gain in an op-amp is the output voltage divided by input voltage. for the inverting amplifier , gain(Av)=-(Rf/Ri) ,where Rf => resistance of the feedback path & Ri=> inverting input terminal resistance for the non-inverting amplifier , gain(Av)=(1+(Rf/Ri)) , where Rf => same & Ri=> non inverting input terminal resisance
Difference between RF microwave?
RF means radio frequency or relativity low range of frequency microwaves however are into the top range of the spectrum or very hi frequency.
Can you run two TVs off one set top box?
buy a AV to RF converter connect 1 tv with AV output and other one with RF out put, some STB have RF out put ,check it and enjoy .but u will have to watch the same channel at the other tv also.
How do you connect an RF out from a TV to a 3.5mm AV in jack on a portable projector to get picture and sound as I can't find such an adaptor anywhere?
There is no such adapter. A RF OUT does not give you VIDEO, connect your Video Cable to the VIDEO OUT connector on the TV set.
Difference between IF and RF signal?
RF signal is coming from an antenna. So it contains electromagnetic waves. But when the signal is processed using electronics circuits, the range of frequency may not be sufficient. So that RF has to be convert to some other frequency acceptable by the circuit. And IF is the intermediate frequency used for tuning & other purpose.
Have cable box if necessary. Have an RF modulator if necessary. Cable box has RF jacks. Recorder has AV jacks. How do you hook up a digital HDTV to a tunerless DVD recorder?
To connect a digital HDTV to a tunerless DVD recorder, first connect the cable box to the RF modulator using the RF output. Then, connect the RF modulator’s output to the DVD recorder’s AV jacks using the appropriate cables (typically composite video and audio cables). Finally, connect the DVD recorder's output to the HDTV using HDMI or composite cables, ensuring both devices are set to their corresponding input/output settings for proper signal transmission.
Do I need AV cables for the n64?
You can choose to connect the Nintendo 64 with either the A/V cables or the optional RF switch. Both can be found on Ebay or Amazon.
What is the relationship between chain length and Rf value?
As a general rule the longer the carbon chain the greater the Rf value.
