0
Add your answer:
Earn +20 pts
Should billy parrott be shot?
Do you have a high powered rifle? Do you have a high powered rifle?
How do you mount a red dot scope on a 9MM high point rifle?
Best left to a gunsmith
Is a 17 rifle a high powered rifle?
No, it's a subcalibre rimfire rifle.
Whats the best high powered rifle caliber?
Best will be determined by intended use, your pocket book, your skills and what is available
What are the ratings and certificates for The High Powered Rifle - 1960?
The High Powered Rifle - 1960 is rated/received certificates of: USA:Approved USA:Passed (National Board of Review)
Do you need a licence to buy a high powered rifle in Florida?
No.
What does sniped mean?
Shot from a long distance with a high powered rifle.
Who makes high country rifle scopes?
I believe Tasco made the high country scope.
When sighting in a rifle with a Swift scope and your shot is high do you turn the scope adjustment with the up arrow 0r go down with the adjustment on the scope?
Down
How to install a rifle scope?
Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.
What was the first high powered rifle?
That would PROBABLY be the first rifle to use a smokeless powder cartridge- the French 8mm Lebel.
What is a high-powered rifle?
Generally, a "high-powered rifle" is any modern rifle designed to fire a bullet at high velocity from a hollow cylindrical metal shell by means of igniting a primer and detonating a smokeless power charge contained within. Exactly where a "rifle" becomes a "high-powered rifle" has never been definitively established.Clearly rifles chambered for the .30/30, the .30/06, the .270 Winchester, and the .308-- which are designed for hunting medium to big game and/or military use--are high-powered rifles. Even smaller rounds such as the .243 Winchester, the .222 and the .22 hornet are generally so classified. Alternatively, .22 rimfires are generally not considered high-powered rifles, nor are rifles designed to fire handgun rounds such as the .357 magnum and the .44 magnum.
