adjustment knobs located under the caps. Remove the caps, the markings indicate which way to turn knobs to move the strike of the bullet.
If you just put a new scope on your gun it will not be zeroed in. you can get your local gun shop to zero it in or you can just shoot at a target and adjust it accordingly.
Loosen and remove the caps from the knobs on the top and right of the scope. Using a flathead screwdriver, turn the dials under these caps. Each click will adjust your shot (in reference to crosshair position, of course) 1/4 inch in the direction noted on the knob
Depends on if a scope mount is made for the gun.
you can put a scope on almost any gun, but why?
In my experience with any guns, as long as the gun has a tactical rail, you can fit pretty much any scope on it. For example I put my high tech airsoft red dot sight on my cheap nerf gun. You can modify what the scope can fit on because there are allen wrench screws to adjust the width at the bottom on pretty much any scope unless its already attached to the gun.
A scope mount for a gun is used to magnify and visualize targets in the distance. You can purchase a scope mount from any gun store or from a hunting store.
You have to mention the gun to get an answer.
in the scope its a slide on the top put the scope on the gun aligned with the hole in the gun and scope then pour bbs into the scope
If you have a gun with an integrated scope, all you have to do is go ingame, equip the gun, and press right-click. Your scope should come up. If it does not, check your settings for the controls, and if your gun has a scope. If your gun dose NOT have a pre-attached scope, you can go to the "Modification" tab, and select your gun. You can buy attachments in this menu, including scopes, silencers, and clips. Hope this helped.
Follow instructions included with the scope. If you don't have them, find a gunsmith.
20 kills with an ACOG scope on your gun