That would depend on whether they are ceramic tiles or more vinyl tiles.
Answer from Choices (http://www.choicesflooring.com.au/vinyl/) Generally, cushion vinyl is laid loosely so any imperfections in the floor don't show through over time. It can also be glued down, but the flooring needs to be completely level. Vinyl tiles or planks are glued down so the surface needs to be completely level, which is done by applying a self- leveler to the floor if required.
If the vinyl is down tight , the answer is YES, Laminate con go over it
Vinyl.
No, you can't. It would peel off like sunburned skin, if it ever even set up. And why in the world would you want to do that anyway? Yes you can; http://www.nauticexpo.com/prod/polyflor-voyager-flooring/vinyl-floor-coverings-for-ship-31432-193520.html
A carpeted classroom would generally sound quieter and more muffled compared to a classroom with a hard vinyl floor. The carpet absorbs sound, reducing echoes and minimizing the noise created by footsteps and other movements. In contrast, a hard vinyl floor reflects sound, which can lead to a louder and more reverberant environment. Overall, the carpet can contribute to a more focused and less distracting atmosphere for learning.
What is the weight of Vinyl Floor tiles per m2
The benefits of vinyl floor tiles is that they are easy to clean and they are very durable. If you spill anything on the floor, you can easily wipe it up or mop it up.
nowhere.
form_title= Vinyl Floor Tiles form_header= Easy to clean and easy to install- Vinyl. Do you need to remove old flooring?*= () Yes () No What color do you want the tile?*= _ [50] What are the dimensions of the area?*= _ [50]
Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl
Ceramic tiles have a grout "gap" but vinyl tiles shouldn't have a gap.
You start by weep the vinyl tiles with a broom. Then Wash the vinyl tiles with disodium phosphate, using a nylon pad. What you need to do next uis rinse vertical-running tiles with wet rags. Rinse floor tiles with a mop. Let the vinyl tiles dry for two hours.
You shouldn't use a floor steamer on vinyl floor tiles because the steam could cause the floor to buckle, come up at the seams or on the edges. Steamers are good for tile floors and some hardwood floors.
To efficiently remove vinyl tiles from a floor surface, you can use a heat gun or a hairdryer to soften the adhesive underneath the tiles. Then, use a putty knife or a floor scraper to gently pry up the tiles. Be sure to work in small sections and take your time to avoid damaging the floor underneath.
The easiest vinyl floor tiles to install are the type called "peel and stick" tiles. These tiles come pre-cut so there is less measuring and little cutting. The backing peels off and the tiles can then be placed on the floor.
At most retailers, you can get 20 vinyl flooring tiles for between $10 and $30, and depending on the caliber of quality you would like, they can be as much as $50 for 20 tiles.
To efficiently remove vinyl floor tiles, start by heating the tiles with a heat gun or hairdryer to soften the adhesive. Then, use a putty knife or floor scraper to gently pry up the tiles. Work in small sections and be careful not to damage the subfloor. Dispose of the tiles properly and clean the area thoroughly before installing new flooring.