Yes you can, however, ensure that this is the best option before executing. I do this to reinforce the self-stick vinyl tile and laminate flooring in my basement and it works great. I got tired of dropping a knife or something creating a huge gash requiring replacement. The polyurethane layer has protected my floors for years. Occasional reapplication of polyurethane in spots where needed making it look new brand new again versus cutting out and re-sticking a piece of the laminate floor that will never look as good as new...I use the former. There are a lot of nay-sayers out there about polyurethane on vinyl tiles and laminate floors, but I've always had great success.
If the vinyl is down tight , the answer is YES, Laminate con go over it
Vinyl.
That would depend on whether they are ceramic tiles or more vinyl tiles.
Answer from Choices (http://www.choicesflooring.com.au/vinyl/) Generally, cushion vinyl is laid loosely so any imperfections in the floor don't show through over time. It can also be glued down, but the flooring needs to be completely level. Vinyl tiles or planks are glued down so the surface needs to be completely level, which is done by applying a self- leveler to the floor if required.
Yes you can, however, ensure that this is the best option before executing. I do this to reinforce the self-stick vinyl tile and laminate flooring in my basement and it works great. I got tired of dropping a knife or something creating a huge gash requiring replacement. The polyurethane layer has protected my floors for years. Occasional reapplication of polyurethane in spots where needed making it look new brand new again versus cutting out and re-sticking a piece of the laminate floor that will never look as good as new...I use the former. There are a lot of nay-sayers out there about polyurethane on vinyl tiles and laminate floors, but I've always had great success.
No, you should not.
dampen a rag with lighter fluid or mineral spirits. no you wont remove the polyurethane, its dry. but it will however remove the glue with no problem or blemishes in your poly.
What is the weight of Vinyl Floor tiles per m2
No, in fact the wax can ruin the polyurethane finish. Clean the floor with a good wood floor cleaner. Do not mop with water.
Vinyl floor covering.
Polyurethane applied to a floor is virtually never sprayed. It is generally applied with an absorbent pad, frequently made of wool or a synthetic.
If you mean an oil based polyurethane, no, it will dry too hard and will chip off over time and normally isn't meant for exterior work. A better option would be to use a 100% acrylic clear polyurethane, paint or solid stain. They are adhesive enough to adhere to vinyl fencing or decking and will flex during freeze/thaw cycles.
Normally a low density Polyurethane (foam) covered in vinyl.
Yes, you can.
You might want to check the manufacturer's labels which often state whether you can use a product on a vinyl floor. You can use SC Johnson Wax Tile and Vinyl Floor Cleaner and Pledge Tile and Vinyl Floor Cleaner.
No! Polyurethane needs a porous surface and because pergo is not, you would only ruin the floor.