How do you use the sights on a Winchester model 94?

Answer 1

Some 1894's are equipped with a "Tang" sight, a post mounted behind the hammer with an aperture in it that flips up. These are generally set for long range shots (300-400 yards). The "iron" sights work just like any other. Line the front bead up between the horns on the rear and set it on the target. The saw toothed ramp under the rear sight can be slid forward raising the rear sight slightly. Each 'step' in the ramp represents a 100 yards increase in range. For shots 100 yards and under, you'd use the lowest step. For 300 yard shots, you'd slide the ramp up 2 more clicks to the 3rd step in the ramp. Adjusting these sights isn't easy. For instance, if the gun shoots to the left of your point of aim, you'll need to tap the rear sight to the right. It sounds easy enough, but you can't just go whacking away at it with a hammer. You'll need to set a block of hardwood or soft metal (brass is best) against the dovetail of the rear sight and set the gun on a stack of padding so you don't dent up the stock. Give the sight a couple of taps and try it out. It may take several trys to get it just right and you may end up going too far and have to tap it back some so don't go nuts pounding on it.