0
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Lao
BlakeAdd your answer:
Earn +20 pts
What is screeding?
Grano Screed is a type of flooring. The flooring is a tile-type of flooring. You need to use cement to put the flooring down.
Flooring Contractor?
form_title= Flooring Contractor form_header= Hire a professional to install your floors! What type of flooring do you want to install?*= {Carpet, Wood, Laminate, More than One} Do you need flooring for a business or residence?*= () Business () Residence What is the size of the space?*= _ [50]
What are the materials used in making concrete flooring?
For making concrete the only one thing you need is a hot and sizzling sexy girls beside u.
Installing Laminate Floors?
form_title=laminate floor installation form_header=11133 Has the flooring material already been purchased for this project?*= () Yes () No What is your preferred variety of laminate flooring ?*= () Simulated hardwood () Simulated tile () Simulated stone or marble Which rooms would you like to install new flooring in? (Select all that apply)*= [] Living room [] Dining room [] Kitchen [] Hallway [] Stair Landing [] Entry [] Bedroom(s) [] Bathroom(s) [] Family room [] Stairs
How do you put concrete on concrete and make it stick?
you need to have a ''keyway''---that is a groove in the base concrete,can be cut in if concrete has set,if not set,oil a 2x4lightly(lightly) & imbed it into the base concrete flush.
What kind of hardwood flooring is easy to install on your own?
There are lots of kinds of click-in, tongue and groove flooring available. All you'll need is a hammer and a power saw to install most of the brands out there.
Do you need sheetrock if you use tongue and groove?
If the face of your tongue and groove is smooth then you don't need drywall. I have one whole room covered in T&G cedar and it looks great.
How can I use a router to create tongue and groove boards?
To create tongue and groove boards using a router, you will need a router table and a matched set of tongue and groove router bits. Set up the router table with the appropriate bit for each cut, then adjust the height of the bits to match the thickness of your boards. Use the router to cut the tongue and groove profiles on the edges of the boards, ensuring a tight fit for assembly.
Do you need more than the tiles to put in laminate flooring?
In order to determine if you need more than tiles to put in laminate flooring it depends on what kind of flooring you are going to buy . There are differents options you can buy such as ones that come pre - glued or ones you have to glue yourself when installing .
How can I use a table saw to create tongue and groove boards?
To create tongue and groove boards using a table saw, you will need to set up the saw with a dado blade to cut the groove and a regular blade to cut the tongue. Adjust the blade height and fence to the desired measurements for the tongue and groove. Carefully feed the boards through the saw, making sure to keep them flat against the table and fence for accurate cuts. Repeat the process for each board until you have created the desired tongue and groove joints. Remember to always follow safety precautions when using power tools.
How can I make tongue and groove joints using a table saw?
To make tongue and groove joints using a table saw, you will need to set up the saw with a dado blade to cut the groove and a regular blade to cut the tongue. Adjust the height and width of the blades to match the thickness of your wood. Use a featherboard to keep the wood steady and a miter gauge to guide the cuts. Cut the groove first, then adjust the blades to cut the tongue on the mating piece. Test the fit and make any necessary adjustments before finalizing the joint.
How can I effectively remove glued vinyl flooring?
To effectively remove glued vinyl flooring, you can start by heating the adhesive with a heat gun or hairdryer to soften it. Then, use a putty knife or floor scraper to gently pry up the flooring. Be careful not to damage the subfloor underneath. You may also need to use a solvent or adhesive remover to help loosen the glue. Work in small sections and take your time to ensure a clean removal process.
How can I effectively remove glued down laminate flooring?
To effectively remove glued down laminate flooring, you can start by using a heat gun or hairdryer to soften the adhesive. Then, carefully pry up the flooring using a putty knife or floor scraper. Work slowly and methodically to avoid damaging the subfloor. You may also need to use a solvent or adhesive remover to help loosen stubborn spots. Be sure to wear protective gear and work in a well-ventilated area.
How do you install enginered flooring over concrete?
The engineered flooring can be either floated above or glued to the concrete.
How can I create a strong and seamless connection between two pieces of wood by making tongue and groove joints?
To create a strong and seamless connection between two pieces of wood using tongue and groove joints, you will need to carefully cut a protruding "tongue" on one piece of wood that fits into a corresponding groove on the other piece. This creates a secure and flush connection that can be further reinforced with glue or nails for added strength. Make sure to measure and cut the joints accurately to ensure a tight fit and a professional-looking finish.
How can I effectively remove glued linoleum flooring?
To effectively remove glued linoleum flooring, you can start by heating the adhesive with a heat gun or hairdryer to soften it. Then, use a putty knife or floor scraper to carefully lift and peel off the linoleum. You may also need to use a solvent or adhesive remover to help dissolve the glue for easier removal. Be sure to work slowly and carefully to avoid damaging the subfloor.
How to Install Engineered Flooring?
Engineered flooring is a layered composition flooring, meaning that the top, decorative layer is real hardwood and the subsequent layers are made of plywood or particle board. In short, engineered flooring provides the same look as real hardwood flooring without the associated cost and upkeep.To install engineered flooring, you will need a chop saw, table saw, a small hardwood flooring nailer and floor adhesive if installing the flooring over a concrete sub floor.1.) Measure the room you will be installing the engineered flooring in to calculate how much engineered flooring you will need. As a rule of thumb, purchase 10% more product than you originally anticipate to allow room for error.2.) If you are not working in a square room, you will want to install the flooring planks parallel to the longest wall.3.) Lay your first row of planks with the tongue side, or the side with the lip, facing toward you and away from the wall. The last piece of engineered flooring probably will not fit perfectly. Use your chop saw to cut it to size.4.) Lay your second row of planks with the groove side facing the tongue side of the previous row, interlocking the planks as you go. The last piece of engineered flooring probably will not fit perfectly. Use your chop saw to cut it to size.5.) Using your nailer, nail the tongue of each piece of flooring to your sub floor.**Note: if you are installing the engineered flooring over a concrete sub floor, you will want to glue the flooring to the floor rather than nail it.6.) Repeat steps 3, 4 and 5 until all planks have been laid, staggering the pieces as you go for a more aesthetically pleasing look (i.e., you don’t want all of your seams to line up).7.) After all the flooring has been laid, you may find that you need to cut some pieces of engineered flooring in half long ways to fit against the baseboard. Use your table saw to cut these pieces to size.As a rule of thumb, a good installation will have a quarter inch or less gap around the perimeter of the room for quarter round to be installed.
