a 30 pf capacitor is connected into a 240v, 60 hz circuit. what is the current flow into the circuit
The red dot on the top of a 120V capacitor typically indicates the positive terminal. It is important to ensure that the capacitor is connected with the correct polarity to prevent damage to the capacitor or the circuit.
Yes, an electric circuit can be completed without connecting it to earth. The circuit needs a complete path for the current to flow back to the source, so as long as the circuit is properly connected and the electrons can flow through the components, it will work without needing an earth connection.
A tank circuit is used in electronic circuits to store and transfer energy at a specific frequency. It consists of an inductor and a capacitor connected in parallel, which allows the circuit to resonate at a particular frequency. Tank circuits are commonly used in radio frequency amplifiers, oscillators, and tuning circuits.
the voltage number on the capacitor indicates that the capacitor can with stand to that particular voltage across it.generally during design, the value of capacitor will be selected in such a way that this voltage rating should be double than what really we get in the circuit
a 30 pf capacitor is connected into a 240v, 60 hz circuit. what is the current flow into the circuit
A circuit in which elements are connected in series.For example in RLC series circuit resistor,inductor and capacitor are connected in series.
Yes, you can connect a polarized capacitor to a direct current. Make sure you get your polarization is correct.A non polarized capacitor can be connected in a DC circuit as well. "Non Polarized" just means it does not matter which side of the capacitor is positive. If you attempt to connect a polarized capacitor in a DC circuit backwards, you will know when the capacitor explodes.
series resonant circuit
This is because when you introduce a capacitor, the circuit is no longer a DC circuit. If you're using a multimeter see if there is an AC setting to measure the current.
a switch and a capacitor which is connected in series with the switch
When capacitors are connected in parallel, the total capacitance in the circuit in which they are connected is the sum of both capacitances. Capacitors in parallel add like resistors in series, while capacitors in series add like resistors in parallel.
The same as the time constant of a 2.7 microfarad capacitor and a 33 ohm resistor connected in series.
No, disconnecting after providing starting torque to starting winding.
The circuit has one inductor and capacitor connected in such a way that it produce the resonance condition for only one frequency. on the other hand for double tuned circuit it has more number of reactive elements and it has two tuning frequency. The single tuned circuit is of interest when the poles are imaginary, and rest of the two cases are not more interest. w=wn the time it produce the resonance and the damping factor zeta is zero and the circuit is in undamped condition.
A trimmer capacitor is a semi-adjustable capacitor placed across a variable tuning capacitor and pre-set to allow the main capacitor to track correctly with another variable capacitor on the same shaft. The adjustment takes out any differences introduced by the connected circuit.
Ghost power may be acting on a circuit if it has a capacitor or transformer connected. This will supply power long after the input has been disconnected.