0
To convert from 32% nitrogen fertilizer to 28% nitrogen fertilizer, you will need to dilute the 32% nitrogen fertilizer by adding a suitable amount of a material with negligible nitrogen content. Calculate the amount needed using the formula: (desired % nitrogen - current % nitrogen) / (32% - desired % nitrogen) = dilution factor. Then multiply the dilution factor by the amount of 32% nitrogen fertilizer to obtain the amount of material to be added.
Add your answer:
Earn +20 pts
How much uan 32 percent fertilizer should you mix with a gallon of water?
To mix a 32% UAN fertilizer with water, you would typically dilute it at a rate of 1 part fertilizer to 2 parts water. Therefore, you would mix approximately 0.33 gallons of 32% UAN fertilizer with 0.67 gallons of water to make a solution.
What is 28 degrees in Celsius put in Fahrenheit?
28 degrees Celsius is equivalent to 82.4 degrees Fahrenheit.
How do you convert 60 degrees to Celsius?
To convert 60 degrees Fahrenheit to Celsius, subtract 32 from 60 to get 28, then multiply by 5/9 to get approximately 15.56 degrees Celsius.
Which stateWhich statement about the effusion rates of nitrogen and oxygen is truement about the effusion rates of nitrogen and oxygen is true?
The rate of effusion is inversely related to the square root of the molar mass. Or stated another way, the larger or heavier the gas, the slower the effusion rate. Nitrogen gas (N2) has a molar mass of 28 g/mole and oxygen gas (O2) has a molar mass of 32 g/mole. Nitrogen will diffuse faster. rate N2/rate O2 = sqrt 32/sqrt 28 = 5.66/5.29 = 1.07. So, N2 effuses 1.07x faster than O2, or 7% faster. For more information on this, look up Graham's Law of Effusion.
How many units of nitrogen in a gallon of 32 percent liquid?
3.56 pounds of N/gal of 32%
If you have 100 gallon of 32 percent nitrogen fertilizer and want to convert it to 28 percent nitrogen fertilize how much water do you add?
14 gallons
What is side dressing in fertilizer application?
It's when you put down nitrogen (Normally) as a liquid, 28% or 32% nitrogen. This is done with a field cultivator or a center/off-center disk with a injection system to get the liquid nitrogen in the ground.
How many gallons are in 1 ton of 32 percent nitrogen fertilizer?
180
Difference between 32-0-0 and 34-0-0 fertilizer?
The numbers in each fertilizer represent the percentage of nitrogen, phosphorus, and potassium, respectively. Therefore, the difference between 32-0-0 and 34-0-0 fertilizer is the nitrogen content - the 32-0-0 fertilizer has 32% nitrogen, while the 34-0-0 fertilizer has 34% nitrogen. Nitrogen is important for plant growth and development.
What is 16-32-16 fertilizer used for?
16-32-16 refers to 16% nitrogen 32% phosphate and 16% potash. It is used for plant growth.
What is 28 degrees Celsius converted into Fahrenheit?
To convert Celsius to Fahrenheit, the formula is: F=C(9/5) + 32. In this case, F = 28(9/5) + 32 F = 82.4°
How much uan 32 percent fertilizer should you mix with a gallon of water?
To mix a 32% UAN fertilizer with water, you would typically dilute it at a rate of 1 part fertilizer to 2 parts water. Therefore, you would mix approximately 0.33 gallons of 32% UAN fertilizer with 0.67 gallons of water to make a solution.
What is the variance of 4 49 10 47 32 28 32 32 32 and 28?
The variance of 4 49 10 47 32 28 32 32 32 and 28 is: 194.044444444
What is 28-32?
28-32 = -4
How do you convert 100 gallons of 32 percent UAN to 28 percent UAN?
32% has a density of 11.04#/gal so 100 gal=1104#. 1104#*32%=353.28# of Nitrogen To convert 353.28# of Nitrogen into a 28% solution instead of 32% you must divide the #of nitrogen by the new solution value to get total pounds of new soultion and the ability to subtraced the two values to determine the total dilutant needed: 353.28#N in 28% solution would be 353.28/28%=1261.71# 28% solution 1261.71# 28% -1104# 32%= 157.71# of dilutant (water) needed to make 28% soultion. To figure out what percentace 32% is of the solution you divide the 32% solution weight by the new soultion weight: 1104/1261.71=.875 28% therefore is 87.5% of 32% by weight not volume. To solve the problem you need to divide the original weight of 32% by its percentage in the new solution to get the total solution weight of the new solution and then subtract the original solution weight to get the amount of dilutant needed to dilute 32% to a 28% solution. Do the following: (1104/.875)-1104=1261.71# of 28% solution. To dilulte 100 gal of 32% you will need to add water to get to the final weight of 28% solution 1261.71# 28%-1104# 32%=157.71# Dilutant (18.91 gal) Finished product you will have 118.91gal of 28% weighing 1261.71# 28% solution will be 10.611#/gal The fomula for this problem would be ((Galons 32% * 11.04)/.875)-(gal 32% * 11.04)= dilutant need. (gal 32% * 11.04)+ dilutant = # of 28% solution.
What is 28 out of 32 in simplest form?
28/32
What is the sum of 32 and 28?
32 + 28 = 60
