No, it is not recommended to plug a 125 volt 30 amp plug into a 120 volt 30 amp outlet. The voltage difference may cause damage to the equipment and pose a safety hazard. It is important to use the correct voltage outlets for your devices.
No, a 220 circuit breaker is designed to handle higher voltages than a 120 light bulb requires. Using a 220 circuit breaker for a 120 light bulb can result in damage to the light bulb or a potential safety hazard. It is better to use the appropriate circuit breaker for the specific voltage requirements of the light bulb.
A 125 watt CFL bulb typically produces about 5400-6200 lumens.
The first thing we have to do is clarify the question. A cable rating of 125 volts is an insulation rating of the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, equipment is tested to destruction. The label that is given to wire as a result of the tests is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply. So to answer the question yes, the 125 volt insulation rating on the cable can be used to supply a source of 120 volts to a 120 volt rated piece of equipment.
150 volts is 125% of 120 volts.
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
yes
NO! There are 50 bulbs in a 2.5 volt string or 125 volts. There are 35 bulbs in a 3.5 volt string or 122.5 volts. If you put 50 3.5 volt bulbs in you will have 175 volts and most american house have 110 volt service so you will have dim bulbs.
No, it is not recommended to plug a 125 volt 30 amp plug into a 120 volt 30 amp outlet. The voltage difference may cause damage to the equipment and pose a safety hazard. It is important to use the correct voltage outlets for your devices.
125% of 120= 125% * 120= 1.25 * 120= 150
-120
125 x 120 = 15,000
No, a 220 circuit breaker is designed to handle higher voltages than a 120 light bulb requires. Using a 220 circuit breaker for a 120 light bulb can result in damage to the light bulb or a potential safety hazard. It is better to use the appropriate circuit breaker for the specific voltage requirements of the light bulb.
A 125 watt CFL bulb typically produces about 5400-6200 lumens.
Yes.
The common factors of 120 and 125 are: 1 and 5