Owner's manual. The person who posted the above is a wise guy. We all come to the internet for answers when we cannot get them ourselves. If I had an owners manual available, that would have been my first source to set the correct time. When I find out the answer I will post it.
It is easy to set a Brookstone Atomic Clock. First, one must install the batteries. Then, follow the instructions on the screen to set the time to the correct time.
To set the date on a Timex T276B clock radio, start by pressing the "Time/Date" button on the top of the clock. Use the "Hour" and "Minute" buttons to adjust the date. Press the "Time/Date" button again to confirm the date setting.
Almost all clock radios have multiple wake-up alarms that can be set at different volumes.
by hitting brick on its screen
With an ink pen for hrs and min
how do i set the clock in a 2005 saturn vue
To set the clock on a 2005 Jeep Grand Cherokee satellite radio, turn on the vehicle and press the "Menu" button on the radio. Use the tuning knob to scroll to "Clock" and select it. Then, adjust the hours and minutes using the knob, and press "Select" to confirm each change. Finally, exit the menu to save the settings.
you set AM / PM at the control center. then you set hours and minutes with a ink pen on the right side of your stock radio. there is a M and a H button.
take all the clips out i believe its like 13 then clip out the grill and u set to go
you get a pen or something and push the little button on the left had side and press time till it goes up to the right time, the owners manule shows it!
reverse backwards for 200 yards then use the buttons on the side of the clock
The transmission computer has also set a code, have the tcm checked.
transmission codes
You can set the clock, on your 2005 Dodge ram, by holding in the volume button. Turning the tuning knob as the volume button is held in. The time will advance with the tuning knob.
You must disconnect the battery and reconnect it at the time it says on your clock.
To set the clock on a 2007 Jeep Compass, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the dashboard until you see the "Clock" option. Use the arrow buttons to adjust the hours and minutes, then press "Enter" to confirm your settings. Finally, exit the menu to save the changes.