Plug one end to the Petcock and the other end to the Carburetor......
Hey you can go to Honda website and read the manual for your cycle On the right side of motor you will see a round piece on the side of the crankcase cover it has 2 screws in it remove 2 screws remove little cover and oil filter is behind it.
you have to go through enough story line to save the mochi's
Jolly Ranchers were originally made in 1949 by Bill and Dorothy Harmsen in Colorado. They were the founders of the Jolly Rancher Company. Jolly Ranchers are now owned by Hershey.
NoNo
Usually, the line feeding the recepticle has a collar that simply slips back away from the recepticle (You may have to push the line forward and then pull back on the collar.) Then it should release.
The fuel filter on a 2006 Honda 350 Rancher is typically located along the fuel line, between the fuel tank and the carburetor. It is often housed within a metal or plastic casing to protect it from debris and damage. To access and replace the fuel filter, you may need to remove the fuel line and any surrounding components for easier access.
To replace the petcock valve on a 2002 Honda Rancher, first, make sure the fuel tank is empty and disconnect the fuel line from the valve. Remove any mounting screws or bolts securing the petcock to the tank and carefully take it out. Install the new petcock by reversing the removal process, ensuring all connections are secure and leak-free before refilling the tank with fuel. Always check for proper functionality after installation.
You have to fabricate fittings to splice into the fuel line at the fuel filter so as to install a fuel pressure gauge. Not uncommon to do with older vehicles.
Type your answer here... a diagram of a honda 2003 recon fuel line
You can check fuel pressure by buying a fuel pressure master kit and remove the fuel line from the fuel rail with a size 17 socket and then install tool and crank.
Drain the fuel from the fuel tank. Remove the fuel line. Remove the fuel filter retaining bolts. Remove the fuel filter. Reverse the process to install the new fuel filter.
The very bottom hose is for fuel overflow, it should be vented to atmosphere.
There is a special adapter that is needed, you remove the fuel line to the fuel rail, install the special adapter and then install the fuel pressure gauge to the adapter and reinstall the fuel line to the adapter.
Disconnect the fuel line at both ends, removed the fuel filter if it is an in-line filter, and blow the line out with an air hose from a compressor.
The fuel lines on a 2001 Honda 300ex run from the fuel tank, along the vehicle's frame, to the carburetor. It is made of a fuel resistant rubber material.
The fuel pump relay on the 1990 Honda Civic wagon will be located on the fuel line. Follow this line to the gas tank underneath the vehicle. This relay will be located on the right side of the line before it goes into the tank.
Install a new line.