If you mean illumination for nighttime on the dashboard it can be the fuse or the dimmer itself. All the illumination runs through a single 20A fuse in the panel on the side of the dashboard. All power runs through the dimmer switch so that can also be bad.
bad fuse, look in your owners manual for the location of the instrument panel fuse.
The warning light symbols are for doors left open, seatbelts left unlocked, being low on gas, oil needing changed, and ABS being dead. Several others are when you have activated warning lights.
It needs a new multi-function switch, or ear plugs.
Chevy Tahoe
Reach behind the housing and you will find a bulb capsule with a retaining ring (plastic). Turn the plastic ring to the left (lefty loosie). After ring comes off, you pull out the capsule (with o ring).
Willie Nelson at Lake Tahoe - 1979 TV was released on: USA: 1979
I would love that answer as well. Some of my instrument panel lights are out, and the diagram in the owner's manual is horrible.
Yes they indeed have brake lights...
headlights
If the warning lights go off in a Chevy Tahoe, it indicates a problem. In order to reset these lights the problem must be solved.
either dimmer switch or blown fuse If you are saying that the tail brake lights are working but the third brake light is not....It may be a defective turn signal switch in the steering column.
The turn signal relay on a 2001 Chevy Tahoe is located behind the lower dashboard on the driver's side. It is just to the left of the cigarette lighter.
Check your fuses.
It is located in the convenience center, which under the left side instrument panel. The relay is in the lower right hand corner.
The fuse for the dash lights on a 2002 Chevy Tahoe is in the fuse box in the interior of the vehicle. There is also a fuse for this in the engine compartment on top of the battery. This fuse is for the speedometer and odometer lights.
A blown fuse can make your dashboard lights to not work in your 1993 Chevy Blazer Tahoe. A burned out bulb can also cause this.
broken turn signal switch assemblyreplace it
yes