answersLogoWhite

0

Reach behind the housing and you will find a bulb capsule with a retaining ring (plastic). Turn the plastic ring to the left (lefty loosie). After ring comes off, you pull out the capsule (with o ring).

User Avatar

Wiki User

13y ago

Still curious? Ask our experts.

Chat with our AI personalities

ViviVivi
Your ride-or-die bestie who's seen you through every high and low.
Chat with Vivi
CoachCoach
Success isn't just about winning—it's about vision, patience, and playing the long game.
Chat with Coach
MaxineMaxine
I respect you enough to keep it real.
Chat with Maxine

Add your answer:

Earn +20 pts
Q: How do you change the fog lamp bulb in a 2007 Chevy Tahoe?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Movies & Television

Is switching a light bulb on a physical or chemical change?

Physical change


How do you replace the front turn signal bulb located on a 2001 Chevy suburban?

Remove the headlight assembly above the bad bulb to gain access to the burned out bulb. To remove the headlight assembly, open the hood, locate and remove the two tabs that lock and hold the assembly in place, with those tabs removed you can wiggle the headlight assembly out in the open. Now you can reach in and r & r the burned out signal bulb


How do you change the turn signal switch on 1990 a Chevy Corsica?

make sure its not your fuse first which is inside of your fuse box if fuse is ok then you can go to light, if you have enough space behind the headlight then you can just untwist the bulb socket out and replace with new bulb then twist back in on some vehicles you might need to unscrew the headlight to get more access to bulb on my Ford i had to take out battery to get to headlight. Good luck


How do you replace a turn signal tail light bulb on a 1989 Chevy Celebrity?

In order to change any of the tail light bulbs in a Chevy Celebrity it is necessary to remove the light fixture: 1. Inside the trunk next to the quarter panel there are three nuts. Remove the center nut on the side you want to remove. It should line up with the center of the light fixture. 2. Pull the fixture out until the stud clears the body. 3. Pull gently outward to pull a tab out of the backup light fixture. 4. Unlock the appropriate socket and remove from the fixture. Change the light bulb and reassemble. ;:


How do you change a 1999 Saturn SL2 odometer bulb?

The manual sez that the odometer lamp is a '73' but offers no help on how to replace it.