The blue flame of a Bunsen burner has a temperature between 500 0C and
700 0C.
Bunsen burners are preferred over candles or fires because the Bunsen burner produces a much higher temperature (noted by the blue flame) and it is much easier to contain/control a Bunsen Burner flame.
The Bunsen burner is an instrument, with flame, used for heating in laboratories.
To heat chemicals or substances in science lab for experiment. There is an air hole in the Bunsen burner where you can screw loose to have open air hole that is the blue flame which is hotter. When there is a close air hole then the flame would be orange in color which is not as hot compared to the blue flame.
Blue or heating flame.
A Bunsen burner produces heat and creates a heat source when doing an experiment. It uses methane and there is two flames a safety flame-you can put your hand through it without burning your hand and a roaring flame-this flame is blue and it is what you use when you preform an experiment.
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
The roaring flame on a Bunsen burner is typically blue in color.
The dominant color of a nonluminous flame on a Bunsen burner is blue. Whereas, the dominant color of a luminous flame on a Bunsen burner is orange.
Its blue
it is the fire
The blue flame of the Bunsen burner is when it is hottest. The yellow flame is the safety flame. you should always start the burner on the safety flame which is produced when the holes on its base are closed.
The blue flame.
No, blue is the hottest color on a Bunsen burner flame. The blue color indicates that the gas is burning efficiently and at a high temperature. Yellow in a Bunsen burner flame suggests incomplete combustion and lower temperatures.
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
For heating water with a Bunsen burner, you would use a blue flame. This is the hottest part of the Bunsen burner flame and provides the most efficient heat transfer to the water.
its a orange colour when closed and a blue colour when is open
The Bunsen burner uses a blue flame, which is produced when air and gas mix in the burner tube and are ignited. This blue flame is hotter than a yellow flame and is commonly used for heating in laboratories.