The screw driver is a special shape. There are many screw drivers on ebay and other websites to open up your Xbox 360 controller.
torx
you need a controller (Guitar controller or xbox controller) and i think you need a little receiver (or is it not needed?) and the game, and a tv
Yes, if it discharges, you need new batteries, open the back cover and put in AA batteries, you can also get a wire (Note: The Xbox 360 core (discontinued), has a wired controller)
The Xbox 360 controller will not work on an original xbox console. Similarly, an original xbox controller will not work with the xbox 360. Each controller only works with its respective console. Xbox 360 Controller --> Xbox 360 Xbox controller --> Xbox
Yes it is possible to use a xbox controller (i have done it) but you need to use 3rd party programs to tell the controller what to do in game.
torx
for the xbox you need a controller. for xbox connect you don't need a controller.
You could open your controller with a T9 (TORX) Screwdriver and solder some wire to a prong to D21 or R21 but you sould proboly go onto YouTube to find a demonstration.
you need a controller (Guitar controller or xbox controller) and i think you need a little receiver (or is it not needed?) and the game, and a tv
It does have wireless connection. It has no controller. The only part you need a controller is for when you first turn your Xbox on. It is so good that you dont need a controller.
a controller
You need to buy a PC Xbox 360 controller.
UN screw it. But doing this VOIDS ANY WARRANTY WITH THE CONTROLLER!
No.
Yes, if it discharges, you need new batteries, open the back cover and put in AA batteries, you can also get a wire (Note: The Xbox 360 core (discontinued), has a wired controller)
Maybe you need to press the xbox guide button (big x button in the middle of the controller) to turn on the xbox and the controller or your controller is broken.
it is simple. take out the screws on the back.