Select start L+R monkeyboyure
== ==
hold L and R, press A and hold, then press start
Press B+Up+Select at the Title Screen to reset the Pokemon White game.
to restart you press start a new game
When it goes to the first logo press and hold the L and R buttons then on the secon logo hold the Y,X,A,and b Buttons. Have fun. ^_^
After that you type in the level you want the Pokemon to be in the calculator and then press R. Have fun. =]
kkkk
== ==
hold L and R, press A and hold, then press start
I believe a soft-reset.
1. Pull out the stylus. 2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip. 3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen: "This operation will delete all your personal data and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel." 4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Press and hold LAP/RESET on main time page.
Press B+Up+Select at the Title Screen to reset the Pokemon White game.
Press both buttons on the "driver information center" at the same time. That should reset it for you.
ModelProcedureF-110Hold REVERB and press TRANSPOSE, hold OTHERS and use the +/- buttons to select "Fct" in the display. Press the Stop/Start button twice.FantomWith the unit on, press MENU. Press the UP or DOWN cursor buttons to select FACTORY RESET. Press 8 (EXECUTE) twiceFantom-G6/7/8Press MENU. Use the CURSOR Up and Down buttons to select "Factory Reset," then press F8 [Select] followed by F7 [OK]. Press F7 [OK] when completed.
To perform a hard reset on a HP IPAQ 6915, you start by pressing and holding the answer/send, power, and end call buttons. While holding these buttons down, use the stylus to press the reset button on the bottom of the device until it restarts. Once restarted, release all of the buttons and then remove the stylus from reset button.
Press the reset button.