RAID level 0
RAID 0RAID 0 (block-level striping without parity or mirroring) has no (or zero) redundancy. It provides improved performance and additional storage but no fault tolerance. Any drive failure destroys the array, and the likelihood of failure increases with more drives in the array.RAID 0 does not provide any fault tolerance.
A: raid 0raid 0 is no fault tolerance...coz it writes the data parallely and it doesnot contain any mirror in that.
Yes. RAID-5 • Fault-tolerant development of striped volume • Parity stripe written to each disk in volume • Parity for set of data always on separate disk from data within set • If one disk fails possible to reconstruct data from If one disk fails, possible to reconstruct data from parity • Minimum of 3 HD's required • Storage efficiency improves as number of HD's increased • Improvement in speed over single disk
Deet, Raid
Well to raid a group what you have to do is... 1. Have your own group ready to raid that other group, 2.Go into the other groups place where loads of the enemys would be, 3. Keep attacking them as many times as you can untill you give up or they give up. 4.When you win have a party and take a video and put it up on youtube :D
RAID 1 OR RAID 5 provide added performance as well as fault tolerance --- GAURAV TOMAR
false
RAID 0 does not provide any fault tolerance.
Windows XP supports spanned and striped RAID 0 volumes Hardware RAID is considered a better solution for fault tolerance than software RAID RAID 0 does not provide fault tolerance
RAID 1, RAID 0+1, RAID 5 and 6.
Fault tolerance is the ability of a system to continue working even when a fault exists. In the case of RAID, which stands for Redundant Array of Inexpensive Discs, fault tolerance is provided by having data recorded on more than one drive, and also by having more than one power supply. Note that RAID 0 is not fault telerant because it is simply stripes the data to increase size and bandwidth, but provides no redundancy. RAID 1 and RAID 5 are fault tolerant, to various levels.
RAID 1 provides fault tolerance by mirroring data across multiple drives. If one drive fails, the system can still function using the data from the mirrored drive.
A: raid 0raid 0 is no fault tolerance...coz it writes the data parallely and it doesnot contain any mirror in that.
raid card
RAID storage can be used to provide fault-tolerance to a system. With RAID, data is stored redundantly on a set of disks to mitigate against failure of a disk.
RAID 6 provides the most fault tolerance of any standard RAID disk arrays (RAID 0, 1 , 5, 6, and RAID 10). If any two disks in a RAID 6 array fail and are removed, then two new blank disks can be installed and no data has been lost. RAID 1+1 or most other "layered" RAID systems can provide more fault tolerance than RAID 6, tolerating the failure of any 3 disks. Some experimental non-standard disk arrays can provide more fault tolerance with less overhead, such as the parchive system. Nearly all distributed file systems and distributed version control systems can be set up so that if one machine is completely destroyed by fire, all the data can be recovered from a backup machine in another building.
RAID 0 does not provide fault tolerance, it's to use space form two or more physical disks and increases the disk space available for a single volume. (pg 406)