To set up a sixaxis controller on your PS3 for the first time, plug it in with the charge cable. Then press the PS button and wait until the controller connects. Your controller will now be set up to work with your PS3.
There should be a flap that lifts up ontop of the wii and there are 4 slots to plug the controller into put it into the closest one to the power button. Not all wii's have that flap. The newer ones with new mario bros. wii dont have the flap, so the controller wont work. Found this out from gamestop.
yes you just have to go under system configuration and set it up. set it up on your wii just like you do a computer.
is there a battery if so where is it
nonononmononon
There will be a fliptop thingy on the top of the wii. Flip it up and there will be a gamecube controller port
My wii is set up using inputs.
Same thing with all wiis: Connect the controller that came with the red Wii console, then press the home button, go to Wii remote settings at the bottom of the screen, and press reconnect. Then, pick up whatever controller(s) that you want to and hold down or repeatedly press the 1 and 2 buttons until the controller connects. Repeat for the red controller, because once you press reconnect, that controller will be disconnected from your Wii console.
To hook up a second Wii controler you must hit the little red button on both your Wii and your Wii controler.
To set up a sixaxis controller on your PS3 for the first time, plug it in with the charge cable. Then press the PS button and wait until the controller connects. Your controller will now be set up to work with your PS3.
There should be a flap that lifts up ontop of the wii and there are 4 slots to plug the controller into put it into the closest one to the power button. Not all wii's have that flap. The newer ones with new mario bros. wii dont have the flap, so the controller wont work. Found this out from gamestop.
It's really up to personal preference. If you're not sure if you should buy a Classic Controller Pro, borrow a friends first and try it out.
Your Wii Remote is broken. Get it replaced. or you didn't set it up right by opening a little compartment in the wii [in front] and open the back of the controller and press the 2 red buttons at the same time
Yes, the Nyko Kama Wireless Controller is chargeable. A Nyko Wii Remote Charging Station is required. The controller requires two AAA batteries that provide up to 30 hours of gameplay.
In order to set up active directory (Domain Controller), go to Start > Run > DCPROMO and then follow the on-screen instructions!
Yes, you can. The way to do it is to use the D-pad. If you don't know what the D-pad is, look at the controller. The D-pad is the thing that looks like a grey plus shape with arrows on the ends. Just hit it as you are bouncing on a bump in the road, landing on a mushroom, etc.
Lego Star Wars? Just turn on a second Wii remote and press the button on the screen when prompted. It's that simple