It should sinc if you push the PS button, but if not you can plug the controller into the playstation with the charger and then try againIf the controller is being connected for the for the first time and is not an official Sony ps3 controller and it is a ps3 compatible controller, connect the controller with a USB cable to the ps3, then under settings> device settings> register new device. This is how it works for Wired and Wireless headsets for the ps3 too.This sectional guide answer was modified by TechnoFixunder 'Modified for a wider understanding'.
You only need a cable and a USB plug
Usually if you plug the usb cable (controller charger cable) into the ps3 console and the ps3 wireless controller it will sync the controller with the console. I had this problem when I went to a friends house and brought my extra controllers. The Controllers just set there and blinked till I plugged it into his usb cable that hooked up to his ps3 console. Hope this helps
Either you need to:- - Charge the controller. - Turn the PS3 on and off again. - Put new batteries in the controller. - Or if you have more than 1 controller then you can use another one.
leave the PS3 turned on and change the settings to turn off the controller when the PS3 is turned off. You can turn the controller and the PS3 back on by pressing the PS3 emblem on the controller
The PS3 controller does not need a charger. Just purchase a Sony PS3 cable and plug into any USB port. Mine is plugged into my Sony HDTV
The average price for the power charger stand on a PS3 is around $8.99.
To reset a PS3 controller to a different PS3 connect the controller to the PS3 you want to connect it to with a charge cable. Press the PS button and wait for it to connect to the new console. After it connects your controller will now work with the new PS3.
It should sinc if you push the PS button, but if not you can plug the controller into the playstation with the charger and then try againIf the controller is being connected for the for the first time and is not an official Sony ps3 controller and it is a ps3 compatible controller, connect the controller with a USB cable to the ps3, then under settings> device settings> register new device. This is how it works for Wired and Wireless headsets for the ps3 too.This sectional guide answer was modified by TechnoFixunder 'Modified for a wider understanding'.
Yes.
You only need a cable and a USB plug
Yes a PS3 comes with a single controller except for the $349.99 PS3 320 GB + Move Bundle system that has a DualShock 3 Controller and a PS3 Move Controller
First connect your controller up to the new PS3 via USB cable. Then press the PS button. The controller will switch to your new PS3.
Usually if you plug the usb cable (controller charger cable) into the ps3 console and the ps3 wireless controller it will sync the controller with the console. I had this problem when I went to a friends house and brought my extra controllers. The Controllers just set there and blinked till I plugged it into his usb cable that hooked up to his ps3 console. Hope this helps
No it's just designed for wirelsss controllers.
To register your Sixaxis/DualShock 3 PlayStation 3 controller with your PlayStation 3 system after it has been used with another system, simply connect it to the PS3 with a USB cable and press the PS button on the controller to sync it. Your controller will now work again.
By purchasing a new controller when it is broken and does not work.