answersLogoWhite

0

What else can I help you with?

Related Questions

What has the author Thomas Ordelt written?

Thomas Ordelt has written: 'Corrosion properties of brazed stainless steel heat exchangers'


Can you remove brazing from steel?

No, once steel has been brazed, the brazed joint cannot be removed without damaging the base metal. The brazing material becomes metallurgically bonded to the steel during the brazing process. If the brazed joint needs to be removed, the only way is to cut or grind it off, which will alter the original piece.


Is there an anchor bolt with a concave head that can be brazed to a copper pipe?

Yes


How can two metals be joined without adhesive?

Welded, brazed or soldered.


Can the forearm stock tab be welded or brazed back on if it has broken off?

You need a gunsmith. It might be possilbe or it might not be


How is a fitting replaced on a copper line for a refrigerator?

Depends on how it is connected flare, compression or brazed or soldered or screwed IPS or FIPS


What kind of metal is a futon frame?

It depends on the manufacturer. Most futons I have seen are steel, and can be cut with a torch, brazed, and welded.


How are mountain bike frames manufactured?

If it's a metal frame, then tubes are cut, mitered and stuck in a jig, then welded/brazed together. Headtube, bottom bracket shell are faced, reamed. BB shell threaded. For carbon fiber, the prepreg cloth is cut into shape, put into a mold, pressurized, heated and cured.


How do you remove the magazine tube on a 870 Remington shotgun?

The actual magazine tube that connects to the receiver is brazed in there, so it removing it isn't an optimum solution.


How much pressure can copper take?

Are the joints brazed or soldered? What diameter is the tubing? When you say copper are you asking type K, L ,M , DWV , M or TP


What is the purpose of a flux?

The purpose of flux is to clean oxides from metal surfaces to ensure a clean bond in soldering or brassing them together. without a proper flux soldered and brazed joint integrity is unreliable.


Can you use solder to attach a heat shield to a Ford Bronco II muffler?

No. This must be welded, bolted, screwed, brazed or otherwise fastened so that high temperatures and vibration will not cause it to fail.