The electrical code states that a 7.5 HP 460 volt three phase motor draws 11 amps. For fuse sizes, non time delay - 30 amps, time delay type D - 20 amps and if using a breaker it will be 30 amps. Minimum wire size is #12 and the maximum setting of overload devices will be 13.75 amps
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
Only if you want to damage it. "277" Volt 3-phase will usually mean 277 from each phase to neutral, and 480 from phase to phase. By "230 3-phase", you likely mean 120 phase-to-neutral, and 208 phase-to-phase. If you really mean 230, then you are probably NOT talking about a three phase motor.
200 and 100
In North America fuse sizes are not colour coded. Manufactures have all sorts of colours and advertising on their own particular brand of fuses. What is common is the type and fuse trip size, this number is on all manufactured fuses along with the maximum voltage that the fuse can be subjected to.
The generator should be about ¾ hp.
Yes this size motor can be operated by bringing a 600 volt three phase supply to it.
It is limited by the size of the fuse in the circuit.
i have 200 hp motor what i need cable size in 100 feet distance
The electrical code book states that a 40 HP 230 volt three phase motor draws 104 amps. For that motor the wire must be rated for 131 amps, Non time delay fuses at 300 amps, time delay fuses at 175 amps or a 250 amp circuit breaker. When calculating wire sizes and motor protection the motor's full load amperage should be taken from the motor's nameplate.
For a 208 volt single phase motor that pulls 1.4 amps, you would typically use a 2 amp breaker for proper protection. This allows for a small safety margin above the motor's operating current to prevent nuisance tripping. Be sure to consult the motor's manufacturer specifications for the most accurate breaker size.
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
probably about 50 hp depending on how reliable the efficiency ratings of the various manufacturers are
Only if you want to damage it. "277" Volt 3-phase will usually mean 277 from each phase to neutral, and 480 from phase to phase. By "230 3-phase", you likely mean 120 phase-to-neutral, and 208 phase-to-phase. If you really mean 230, then you are probably NOT talking about a three phase motor.
4.5 volt battery sold only in Russo
A 60 horsepower motor typically requires a minimum breaker size of 100 Amps for normal operation. It is important to consult the motor's specifications or a licensed electrician to ensure the correct breaker size for safe and efficient operation.
No. The 240V lamp will pop the circuit or fuse because the draw is higher than the supply.
The Waring 18BL93 blender typically uses a 5 amp fuse. It is recommended to replace the fuse with the same amp rating to prevent any electrical issues.